Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Sparrow rat rod pro wring problem
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=35660		 Page 1 of 1
Author:  ChrisD [ Tue Mar 06, 2012 9:38 am ]
Post subject:  Sparrow rat rod pro wring problem
Hello peeps ,
My little brother dropped a Sparrow rat rod pro guitar oops_sign ( two humbuckers , 3 way switch 4 pots ) on the floor and since then the guitar has picked up two problems 1 Humming which stops when humbucker is touched ( so prob a grounding problem )
2, one of the humbuckers has very little or no sound coming from it .

I opened it up and its a bit of mess wiring wise solder drips on most the pots but no clear signs of damage or wires that have come off .
Please any suggestion or even better wiring diagrams so i can rewire maybe .
Thanks guys and girls for any help :D
Author:  ChrisD [ Tue Mar 06, 2012 1:53 pm ]
Post subject:  Re: Sparrow rat rod pro wring problem
Anyone ? :) [uncle]
Author:  muskr@ [ Tue Mar 06, 2012 6:27 pm ]
Post subject:  Re: Sparrow rat rod pro wring problem
I would guess that some of the solder joints were probably knocked loose. Test them all with a multimeter and re-solder the loose joints.
Author:  Chameleon [ Wed Mar 07, 2012 4:12 pm ]
Post subject:  Re: Sparrow rat rod pro wring problem
Re-soldering all the connections wouldn't hurt either.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/