| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Need help on bridges from you all http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=36039 |
Page 1 of 1 |
| Author: | Clinchriver [ Fri Apr 06, 2012 6:37 pm ] |
| Post subject: | Re: Need help on bridges from you all |
I installed one of the Schroeder bridges on a buddys LP-JR Stew Mac' specs say its .559 from bottom to the highest saddle thats about right. Thats the coolest looking bridge out of the bunch and he loves the sound. |
|
| Author: | Robbie_McD [ Fri Apr 06, 2012 7:51 pm ] |
| Post subject: | Re: Need help on bridges from you all |
The Babicz Full Contact Hardware bridge that I have been using recently has an extensive veritcal adjustment range.... |
|
| Author: | muskr@ [ Fri Apr 06, 2012 8:00 pm ] |
| Post subject: | Re: Need help on bridges from you all |
Guitar fetish bridge is about 0.67. Opinions differ on guitar fetish hardware, but it seems solid to me and I haven't had any issues with it so far. |
|
| Author: | Clinchriver [ Sat Apr 07, 2012 12:17 pm ] |
| Post subject: | Re: Need help on bridges from you all |
StewMac Pigtail .515 |
|
| Author: | Lincoln Goertzen [ Sat Apr 07, 2012 3:22 pm ] |
| Post subject: | Re: Need help on bridges from you all |
I'm not Chris, but the Hipshot Baby Grand is .509" tall. Can't help with the others, sorry. |
|
| Author: | pullshocks [ Mon Apr 09, 2012 11:38 pm ] |
| Post subject: | Re: Need help on bridges from you all |
There is also the GraphTech Resomax wrap around http://www.graphtech.com/products.html?CategoryID=20 but it doesn't look any thinner than the others |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|