| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| scrapers! http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=36595 |
Page 1 of 1 |
| Author: | WindyCityBluesBox [ Fri May 25, 2012 12:07 pm ] |
| Post subject: | scrapers! |
Just got a few scrapers and a burnisher from stewmac but after reading the manual I've learned that I also need a sharpening stone. What do you guys recommend? |
|
| Author: | alan stassforth [ Fri May 25, 2012 8:30 pm ] |
| Post subject: | Re: scrapers! |
I just use a fine file, and put a slight bevel on the edge, filing into the high point. Good enough for me. |
|
| Author: | An Lao Shi [ Sun May 27, 2012 5:28 am ] |
| Post subject: | Re: scrapers! |
I also just use a file. I lay the scraper on my worktable and run the file along the side . You can feel when the file begins to remove material. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|