| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Martin string spacing at the nut http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=36720 |
Page 1 of 1 |
| Author: | dzsmith [ Thu Jun 07, 2012 7:44 pm ] |
| Post subject: | Martin string spacing at the nut |
Hello, I'm making an electric for my uncle who plays bluegrass on a Martin D21. I'd like to use the same string spacing at the nut that is on his Martin. I believe the spacing may be 1-3/4", but I'm not sure if Marting has a standard spacing. I know the scale length, radius and neck profile won't match the Martin, but I would like to at least match the string spacing at the nut. Anyone have a answer? Thanks, Dan |
|
| Author: | alan stassforth [ Thu Jun 07, 2012 8:43 pm ] |
| Post subject: | Re: Martin string spacing at the nut |
You'll get an accurate response at the acoustic side of the forum. |
|
| Author: | Bob Matthews [ Fri Jun 08, 2012 3:03 am ] |
| Post subject: | Re: Martin string spacing at the nut |
There's a very useful PDF guide from Stewmac with most common nuts sizes http://www.stewmac.com/articles/6001-VS#details.print it out and you should find exactly what you need. Bob |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|