| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| humbucker letters? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=37902 |
Page 1 of 1 |
| Author: | fael097 [ Wed Oct 03, 2012 6:47 pm ] |
| Post subject: | humbucker letters? |
hi, I bought from a guy a some pickups that he took from his guitars, after replacing their humbuckers. turns out that some of the pickups have the letter "b and n" under them, what I assume means bridge and neck, right? problem is that some of them have the letter "f". what does it mean? the pair with this one has nothing written. thanks |
|
| Author: | B. Howard [ Thu Oct 04, 2012 6:16 am ] |
| Post subject: | Re: humbucker letters? |
While it would also be my assumption that "B" would mean bridge position and "N" would mean neck, I would check resistances to be sure they were appropriate for the intended position in the system I was working on. The "F" would refer to pole spacing, Dimarzio has these specs on their site. http://www.dimarzio.com/sites/default/f ... MHBdim.pdf |
|
| Author: | John Coloccia [ Thu Oct 04, 2012 6:48 am ] |
| Post subject: | Re: humbucker letters? |
B. Howard wrote: While it would also be my assumption that "B" would mean bridge position and "N" would mean neck, I would check resistances to be sure they were appropriate for the intended position in the system I was working on. The "F" would refer to pole spacing, Dimarzio has these specs on their site. http://www.dimarzio.com/sites/default/f ... MHBdim.pdf I was thinking it was a Dimarzio F spaced as well. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|