Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Made a double cut design, thoughts?
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=39079		 Page 1 of 1
Author:  JEguitars [ Wed Jan 23, 2013 10:18 pm ]
Post subject:  Made a double cut design, thoughts?
Next to it is my singlecut design that's been on here multiple times. I made this in ArtCam but since I sold my CNC I finished it by hand, but making my own CAD files I can now send them to the waterjet company and have them cut out in aluminum.
Any thoughts on the new design?
Image
Author:  nutsdan [ Wed Jan 23, 2013 11:03 pm ]
Post subject:  Re: Made a double cut design, thoughts?
Nice, but can I suggest that you make the treble side horn the same as your single cut, that way it can be a signature that carries through your range. idunno
Author:  Mattia Valente [ Thu Jan 24, 2013 7:00 am ]
Post subject:  Re: Made a double cut design, thoughts?
To my eye, the upper horn is straight off a PRS and the lower (treble side) just doesn't blend in well with it. Matter of taste, though.
Author:  JEguitars [ Thu Jan 24, 2013 7:13 am ]
Post subject:  Re: Made a double cut design, thoughts?
nutsdan wrote:
Nice, but can I suggest that you make the treble side horn the same as your single cut, that way it can be a signature that carries through your range. idunno

I thought I did?
Author:  Stuart Gort [ Thu Jan 24, 2013 12:28 pm ]
Post subject:  Re: Made a double cut design, thoughts?
I'd have the upper and lower horns match. Aesthetically it doesn't work for me to have the upper horn rounded and the lower horn pointed. I'd like this better if they were both pointed.

But I do like the "Tele" version very much.
Author:  James T [ Tue Feb 12, 2013 1:05 pm ]
Post subject:  Re: Made a double cut design, thoughts?
The body lines are clean , I would soften the lower bout and reduce it just a bit .
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/