Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Nov 26, 2024 12:42 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Wed Jan 30, 2013 8:58 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Sep 24, 2008 8:55 pm
Posts: 3820
Location: Taiwan
First name: Tai
Last Name: Fu
City: Taipei
Country: Taiwan
Focus: Repair
Status: Semi-pro
I don't know if this is a wiring fault or the pickup itself was faulty, but I've just reassembled a customer's Fender Stratocaster I refinished for him (he wanted to go from black to sunburst), and as I was wiring the thing back together the bridge pickup had very bad output that would cut in and out especially when installed. So I took the pickguard off again and discovered one solder was poorly done (I think the customer changed pickup by himself and did a poor job of soldering), so I reflowed the bad solder and the output is good. However I've noticed the pickup sounded rather thin compared to the other pickups, yet the wiring isn't wrong or out of phase.

Could this be a sign of faulty pickup?

_________________
Cat-gut strings are made from kitten guts, stretched out to near breaking point and then hardened with grue saliva. As a result these give a feeling of Pain and anguish whenever played, and often end up playing themselves backwards as part of satanic rituals.

Typhoon Guitars
http://www.typhoon-guitars.com


Top
 Profile  
 
PostPosted: Wed Jan 30, 2013 1:11 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Jul 01, 2011 9:17 am
Posts: 381
First name: Michael
State: AR
Country: USA
Focus: Build
Status: Amateur
If you're asking that by correcting a bad connection you hurt the pickup- I'd say no.

Correcting a bad soldering connection will not change the characteristics of the pickup.
Overheating can "kill" it by melting a coil connection or ruin a component in the chain but
it won't change the pickups properties.

If you removed the pickup from the pickguard then you may have changed the sound by not adjusting it properly.
(height adjustment in relation to strings)
Magnets can lose magnetism in numerous ways so you may want to varify each is magnetized.


Top
 Profile  
 
PostPosted: Mon Feb 04, 2013 9:45 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Feb 07, 2011 8:15 pm
Posts: 529
First name: Mark
Last Name: Sorrentino
Focus: Build
Status: Amateur
Ever figure this one out?

Unless it is a humbucker, wired out of phase with itself, I would think the next thing to check is the magnetism.

_________________
http://www.tinyhouseandland.com


Top
 Profile  
 
PostPosted: Mon Feb 04, 2013 9:52 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Sep 24, 2008 8:55 pm
Posts: 3820
Location: Taiwan
First name: Tai
Last Name: Fu
City: Taipei
Country: Taiwan
Focus: Repair
Status: Semi-pro
Chameleon wrote:
Ever figure this one out?

Unless it is a humbucker, wired out of phase with itself, I would think the next thing to check is the magnetism.


The customer said that the pickup sounded like that before, so it was probably a bad pickup. It was a single coil.

_________________
Cat-gut strings are made from kitten guts, stretched out to near breaking point and then hardened with grue saliva. As a result these give a feeling of Pain and anguish whenever played, and often end up playing themselves backwards as part of satanic rituals.

Typhoon Guitars
http://www.typhoon-guitars.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 56 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com