Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

#18 Model June
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=40046		 Page 1 of 1
Author:  Stuart Gort [ Sat Apr 13, 2013 1:31 pm ]
Post subject:  #18 Model June
I wanted to show this off.

The body weighs 2 lbs. and the neck weighs 1 lb 3 oz. as depicted.

Playing weight should be right about 4.5 lbs...depending on the pickups.

I built a great deal of rigidity between the bridge and nut so it should have very good sustain.

Can't wait to play this one.
Author:  Chris Pile [ Sat Apr 13, 2013 4:02 pm ]
Post subject:  Re: #18 Model June
I can see why you wanted to show it off.
Author:  Brett L Faust [ Sat Apr 13, 2013 8:07 pm ]
Post subject:  Re: #18 Model June
Looking good
Author:  B. Howard [ Mon Apr 15, 2013 3:33 pm ]
Post subject:  Re: #18 Model June
Very nice!
Author:  Darryl Young [ Mon Apr 15, 2013 8:49 pm ]
Post subject:  Re: #18 Model June
Wow, it looks great! Like the weight as well.
Author:  sdsollod [ Tue Apr 23, 2013 10:06 am ]
Post subject:  Re: #18 Model June
Stuart,
How do you make the indentions where the controls will go?
Thanks,
Steve
Author:  AlBDarned [ Tue Apr 23, 2013 10:09 am ]
Post subject:  Re: #18 Model June
Looks pretty sweet! :)
Author:  Alain Moisan [ Tue Apr 23, 2013 11:07 am ]
Post subject:  Re: #18 Model June
Filippo Morelli wrote:
Stuart I'm really enjoying watching your work and thought processes evolve. Well done, keep it up!

Filippo


Same here!
Author:  Stuart Gort [ Tue Apr 23, 2013 11:51 am ]
Post subject:  Re: #18 Model June
sdsollod wrote:
Stuart,
How do you make the indentions where the controls will go?
Thanks,
Steve


I just draw them. :)

On one hand I'm kind of proud to show this kind of thing off...but I'll admit that I'm always a little sensitive about displaying things on this site that are difficult or impossible to achieve by conventional means. I expect indentations like this would be a challenge to recreate using any conventional method.

I have a principle that I apply to designing with cad. I'm not trying to make a LOT of guitars although cad/cam/cnc lends itself directly to that. I'm hoping to present cad/cam/cnc as an accepted category of art. Having learned to use this technology opens up a world of possibilities. These indentations allow for my volume knobs to have just that much less of a height to their profile...a design notion. This would be such a challenge to accomplish conventionally that I expect I'd give up on the idea soon after having it. With cad/cam I can follow up on these little ideas and often it isn't all that much of a challenge to pull it off.
Author:  Stuart Gort [ Tue Apr 23, 2013 11:53 am ]
Post subject:  Re: #18 Model June
Thank you for your kind comments, all....encouraging.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/