Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Latest build in progress - Neck Thru Flying V
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=40825		 Page 1 of 1
Author:  JimO [ Sun Jul 07, 2013 3:33 pm ]
Post subject:  Latest build in progress - Neck Thru Flying V
Been a busy boy, especially since it's been raining constantly down here in the south. Got my Flying V close to the finish line.
It's quite similar in construction to the bass I built recently. I installed the hardware so I could string it up and see if it was good to go before I start applying tung oil finish ( Yes, Ace Hardware not true tung oil I know).

I almost had a heart attack as I was stringing it up. I was plucking the high E and fretting it, and it seemed I was off a fret at the octave, 13 instead of 12! OH CRAP! Panicking I grabbed my fret scale ruler, (thinking I'm gonna have to redo this fretboard), Yep it's right, measured the bridge to the nut, yep. Slap my forehead, the nut was moving. Hadn't glued it down yet. Whew! Clamped it in place. There that's better.

Specs:
Wood came from The Wood Yard in Griffin Georgia. Great wood and good prices.
Body: Figured Maple top with Mahogany body
Neck: 7 piece neck thru, Maple w/ slight flame and Purpleheart laminates.
Rosewood Fretboard w/ Purpleheart dot inlays. (Used a plug cutter)
Graph Tec Gibson Nut
Tuners, bridge, and Gold Hardware from Guitarfetish.com and Guitarnuts.net.
Humbucker Pickups from Guitarfetish
Alpha 500K Pots and Switch from StewMac

Image

Image
Author:  JimO [ Sun Jul 07, 2013 3:37 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
More Pix:

Image

Image

Image

Image

Image

Brothers in Arms!
Image
Author:  dzsmith [ Tue Jul 09, 2013 8:59 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Great looking V Jim!
Very clean lines.
I'd like to see a pic of the neck construction.
DZ
Author:  GRD [ Wed Jul 10, 2013 10:31 am ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
7 piece neck are you insane!!! laughing6-hehe looks sweet I'm looking forward to seeing your progress
Author:  Sandywood [ Thu Jul 11, 2013 2:12 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Looks great Jim and really like the fret dots.

Look forward to seeing it completed and curious about the weight.
Author:  JimO [ Fri Jul 12, 2013 3:42 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
First I built a thickness sander to get them thicknessed right.
Image
Resaw fence
Image
Neck being glued
Image
Author:  JimO [ Fri Jul 12, 2013 3:51 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Started the oil finish last night. Hanging in my shed (I'm at work) and I'll try to get some pix tonight. Looking sick! At least I'm working a seven / 12 stretch so I can apply every night and let it dry. Otherwise I'd be tempted to put it together too soon. I think it wants to rock!
Author:  John Lewis [ Sat Jul 13, 2013 8:55 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
That is gorgeous Jim! It may be the nicest V I've seen. I can't wait to see the finished results.

You are right about the The Wood Yard. I live 25 minutes away - they are the only decent hardwood dealer I know south of Atlanta. Really nice couple of guys and the wood and prices are great. A few months ago I was going through a pile of wood and found some figured Cuban mahogany. It's worth going there to dig around.
Author:  JimO [ Sat Jul 13, 2013 9:29 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Thanks John. Applying the finish, a coat every night. Working 7 - 12's in a row so keeps me from messing with it too much, LOL.
This flame is popping like crazy. I love an oil finish.

Image

Image

Image
Author:  JimO [ Sat Jul 13, 2013 9:31 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Image

Image

Image
Author:  Deserter [ Sun Jul 14, 2013 5:41 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Great looking build there.

Out of interest what oil are you using and did you stain it first at all? I'm just st the finishing stage on mine and can't decide between oil, French polish and celulose laquer.


~Nil carborundum illegitemi~
Author:  JimO [ Sun Jul 14, 2013 8:25 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Ace tung oil finish. Which is a varnish based oil. No stain at all. Applying a coat every night after work.
Author:  dzsmith [ Mon Jul 15, 2013 6:47 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Sa-weet!
Man, the Maple grain really pops!
DZ
Author:  JimO [ Fri Jul 19, 2013 8:39 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Didn't like how rough the Ace Hardware tung oil finish was going on. No matter how carefully I applied it, it would end up rough. Also didn't like the streaks it left on the mahogany. So I sanded it back lightly w/ 200 and 400 grits and applied some Tru Oil. I'll finish it up with that.
Author:  JimO [ Sun Jul 28, 2013 8:32 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Got 'er done. Plays well. trying to get used to it as I built it to Les Paul specs, and I'm a bass player at heart.

Image

Image

Image
Author:  JimO [ Sun Jul 28, 2013 8:35 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Love those lil magnets for covers.
Image

Image

Image
Author:  JasonMoe [ Sun Jul 28, 2013 9:19 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Wow, thats a beauty! Melt some faces!
Author:  dzsmith [ Mon Jul 29, 2013 5:52 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Outstanding!
For those about to shred, we salute you.
Author:  Chris Pile [ Mon Jul 29, 2013 7:39 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Excellent! Love the maple back cover and the striped truss rod cover.
Author:  JimO [ Wed Jul 31, 2013 8:59 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Thanks all. Now to start planning my next builds. 3 guitars for grandkids and my youngest daughter.
Author:  JimO [ Sat Aug 17, 2013 12:20 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
And we're off on the next builds. 3 of them. Busted ass and got 3 bodies started from rough cut mahogany, all cut, thickness sanded and joined, rough shaped on the bandsaw, and the backs resawn to rout cavities. I had bought this wood with neck thru basses and guitars in mind, but due to prompting from my daughter, we're going to try our hand at swirling. I have a 55 gal clean drum to dip with and have located Majic Marble paints. Good homeschool project for Daddy and Doodlebug.
Plan
Image
Bodies:
Image
A clean workbench, Oh My!
Image
Author:  JimO [ Sat Aug 17, 2013 12:25 pm ]
Post subject:  Re: Latest build in progress - Neck Thru Flying V
Resaw the back to rout cavity and chambers.
Image
Power tools and wood:
Image
Neck woods
Image
Side workbench and mess
Image
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/