Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

custom vol/tone knobs
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=41155		 Page 1 of 1
Author:  shadahall [ Sat Aug 17, 2013 5:47 pm ]
Post subject:  custom vol/tone knobs
hey,

i've been surfing the net for truly custom guitar knobs, but seem to find pretty much the same thing regardless of site, tho i have found some unique designs. i am considering the idea of dice and therefore would have to drill them, but i'm guessing i'd have to install an insert.

can you tell me what criteria i need to be searching for to find a solution for this hardbody electric? are knobs a standard size? i'll likely be installing push-push potentiometers as i'll have dual coil humbuckers ... if that matters any.

any beneficial feedback is appreciated.
cheers!
shad
:)
Author:  Chris Pile [ Sat Aug 17, 2013 6:46 pm ]
Post subject:  Re: custom vol/tone knobs
They have dice knobs on eBay.....
If you want to do it yourself, just drill according to the size of the shaft on the potentiometer you use.
Author:  shadahall [ Sat Aug 17, 2013 7:06 pm ]
Post subject:  Re: custom vol/tone knobs
Chris Pile wrote:
They have dice knobs on eBay.....
If you want to do it yourself, just drill according to the size of the shaft on the potentiometer you use.

i just searched "guitar dice knobs" on ebay and found all kinds of styles! thanks. (ref to other thread post comment ...) i wonder if i couldn't find them, because i was searching for "round volume things"! j/k LoL

thanks!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/