Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Nov 25, 2024 5:44 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Fri Dec 20, 2013 1:20 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Apr 28, 2012 7:27 pm
Posts: 277
First name: James
Last Name: Greene
State: Maine
Focus: Build
Status: Semi-pro
I just finished building this for a customer. It is guitar build #14 for me and the first left handed guitar I have made. It is a slight shame that I cannot give this guitar a good playing before shipping it out!

I used Pre-Catalyzed Lacquer for the first time. In the past I have usually used nitrocellulose and I have also used Tru Oil a few times. I enjoyed the 7 day cure time of the pre cat that's for sure. The only negative that I encountered was that the cured pre cat lacquer tends to want to chip out much easier when drilling - for example when you are re drilling tuning key holes, bridge post holes, electronic holes or strap button holes. I think that this is because pre cat lacquer hardens tougher and less flexible and this leaves it more prone to chipping.

The guitar has a 7.25" vintage fender fingerboard radius with 21 frets. It is a full neck through body design and I tried to all but eliminate a neck heel as to allow full access to all frets. The neck and center block are one solid piece of cherrywood. The wings are mahogany and the top wood is also cherrywood. Custom aluminum pickguard, truss rod cover and tremolo cover. On/off mini switches for each pickup.

Image
Image
Image


Top
 Profile  
 
PostPosted: Fri Dec 20, 2013 1:26 am 
Offline
Contributing Member
Contributing Member

Joined: Mon Jul 11, 2011 12:43 am
Posts: 1326
Location: chicagoland, illinois
City: chicagoland
State: illinois
Country: usa
Focus: Build
Status: Amateur
nice! ...Rickenbackeresque


Top
 Profile  
 
PostPosted: Fri Dec 20, 2013 10:17 am 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Very nice James! [clap] What did you use for the white color?
Steve

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
PostPosted: Fri Dec 20, 2013 6:29 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Wow James!
That's a real beauty you've got there!

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Mon Dec 23, 2013 1:29 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Apr 28, 2012 7:27 pm
Posts: 277
First name: James
Last Name: Greene
State: Maine
Focus: Build
Status: Semi-pro
sdsollod wrote:
Very nice James! [clap] What did you use for the white color?
Steve



Thank you. It is some stewmac colortone opaque white mixed with a pre cat lacquer.


Top
 Profile  
 
PostPosted: Mon Dec 23, 2013 10:21 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
The finish looks great James!
What type of bridge did you use?
Want is the metal plate in front of the bridge for?
Thanks,
Dan

_________________
wah
Wah-wah-wah-wah
Wah


Top
 Profile  
 
PostPosted: Wed Dec 25, 2013 1:34 am 
Offline
Cocobolo
Cocobolo

Joined: Sat Apr 28, 2012 7:27 pm
Posts: 277
First name: James
Last Name: Greene
State: Maine
Focus: Build
Status: Semi-pro
dzsmith wrote:
The finish looks great James!
What type of bridge did you use?
Want is the metal plate in front of the bridge for?
Thanks,
Dan



Thanks man.

It is a Gotoh Tremolo. The metal plate is mostly decorative. Though it also acts to protect the finish - the only thing that holds this gotoh bridge against the two posts is string tension. When all strings are removed the bridge will rest against the guitar surface. I also liked the idea of adding more mass and structure to the bridge area for tone/sustain reasons.


Top
 Profile  
 
PostPosted: Fri Dec 27, 2013 4:49 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Nov 16, 2012 12:27 am
Posts: 124
First name: Jimmy
Last Name: Edwards
City: Boston
State: MA
Focus: Build
Status: Professional
Looks great!


Top
 Profile  
 
PostPosted: Fri Dec 27, 2013 5:12 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Fri Jan 15, 2010 3:34 pm
Posts: 2047
First name: Stuart
Last Name: Gort
Country: USA
Focus: Build
Status: Semi-pro
Is very nice.

_________________
I read Emerson on the can. A foolish consistency is the hobgoblin of little minds...true...but a consistent reading of Emerson has its uses nevertheless.

StuMusic


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 48 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com