| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Neck Position http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=43015 |
Page 1 of 1 |
| Author: | mlucas123 [ Fri Mar 21, 2014 5:02 pm ] |
| Post subject: | Neck Position |
I am currently working on a double cutaway body I bought offline cheap. It has a bolt on neck kind of pocket and I'm not sure of the placement of the neck. I don't know if that when I put in the pickup ring that it goes under the extra bit of fret board or if I have to move the neck back a little so the pickup ring isn't under it. There is a line on the heel but I don't know if I should go by that. [img]unnamed%20(1).jpg[/img] |
|
| Author: | johnparchem [ Fri Mar 21, 2014 5:14 pm ] |
| Post subject: | Re: Neck Position |
The neck is positioned to the saddle, do not move to position it for the pickup ring. |
|
| Author: | klooker [ Fri Mar 21, 2014 5:55 pm ] |
| Post subject: | Re: Neck Position |
What John said, unless you want to move the bridge too. Kevin Looker |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|