Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Electronics Cover Project
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=43792		 Page 1 of 1
Author:  Stuart Gort [ Fri Jul 11, 2014 2:14 pm ]
Post subject:  Electronics Cover Project
I didn't like Molly, my latest model with a wooden electronics cover because I had anodized all the hardware black and gave it all silver trim.

So I made this cover to finish off the whole motif. I'll get these anodized black and then I'll sand the raised type and outer edges to get the silver.
Author:  Chris Pile [ Fri Jul 11, 2014 3:08 pm ]
Post subject:  Re: Electronics Cover Project
Super good, Stu.
Author:  Quine [ Fri Jul 11, 2014 7:38 pm ]
Post subject:  Re: Electronics Cover Project
Geez that's nice....I'd almost hate to anodize it. It sort of reminds me of that aluminum trim panel on a '57 Chevy
I hope that your electronics covers are on the FRONT side of the guitar
Author:  dzsmith [ Fri Jul 11, 2014 9:28 pm ]
Post subject:  Re: Electronics Cover Project
Very nice, Stuart!
Author:  John Sonksen [ Fri Jul 11, 2014 11:46 pm ]
Post subject:  Re: Electronics Cover Project
Really like your aesthetics Stuart, and your execution is top notch!
Author:  James T [ Tue Jul 22, 2014 3:54 pm ]
Post subject:  Re: Electronics Cover Project
Tres slick , I like it shiny too
Author:  mechanix [ Fri Jul 25, 2014 10:08 am ]
Post subject:  Re: Electronics Cover Project
Thats awesome work stuart. Super sexy too. Is it cnc milled?
Author:  Stuart Gort [ Fri Jul 25, 2014 1:53 pm ]
Post subject:  Re: Electronics Cover Project
mechanix wrote:
Thats awesome work stuart. Super sexy too. Is it cnc milled?


Thanks...yes...that's done on a cnc vertical milling machine.....really skinny bits. :)
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/