| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Base and top finish for water-based acrylic paint? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=44612 |
Page 1 of 1 |
| Author: | dzsmith [ Wed Nov 19, 2014 6:56 pm ] |
| Post subject: | Base and top finish for water-based acrylic paint? |
I have a Paulonia bass body I want my daughter to paint a picture on. She will be using water based acrylic paint. I'm not sure what to use as sealer and finish coats. I'm thinking flat spray can primer for the sealer and then wipe on poly for the finish coats. I'm not looking for a glass finish, just something to protect it. I'll do some truoil on the Maple neck. Anyone have experience with this? Thanks, Dan Here's some of her handiwork she did during math class. I'm sure whatever she paints will be groovy. |
|
| Author: | old_picker [ Mon Dec 08, 2014 9:01 pm ] |
| Post subject: | Re: Base and top finish for water-based acrylic paint? |
yep wipe on poly over WB acrylic will be ok- you are talking WB acrylic i assume i have shot water based clear lacquer over WB acrylic as well with excellent results you can also shoot nitro over it but it must be sealed off well as it tends to bleed into the nitro if you shoot nitro straight onto WB acrylic it will work if you shot a lot of very light coats to start |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|