| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| installing floyd rose stud bushings... quick question! http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=45027 |
Page 1 of 1 |
| Author: | msween [ Sat Jan 31, 2015 8:02 pm ] |
| Post subject: | installing floyd rose stud bushings... quick question! |
Fitting an FU2 Floyd Rose trem on a Peavey Wolfgang for a customer, and my brain has the dumb today. the supplied studs have a bigger bushing and the customer wants them installed. Do I drill the hole to the same diameter of the knurled part of the bushing, or to the diameter of the unknurled part of the bushing? I want to say drill as per the latter, so the knurls will grab into the wood better, but... it's been a long day, and my brain is fried.... lol Pretty sure I'm right, I'd just like someone to verify if possible. thanks a bunch. |
|
| Author: | Chris Pile [ Sat Jan 31, 2015 8:03 pm ] |
| Post subject: | Re: installing floyd rose stud bushings... quick question! |
Unknurled. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|