| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| headstock angle too steep http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=46177 |
Page 1 of 1 |
| Author: | Nick Wilson [ Fri Aug 14, 2015 12:14 am ] |
| Post subject: | headstock angle too steep |
I was cutting a scarf joint for my neck aiming for a 15 degree angle and ending up with a 19 degree angle. Is there any way i can correct the angle. |
|
| Author: | B. Howard [ Fri Aug 14, 2015 6:25 am ] |
| Post subject: | Re: headstock angle too steep |
You only need to shorten up by 1/16" on a 3/4 board to get the angle back where you want it. As long as the neck and head are not at exact length it shouldn't be a problem to adjust the angles. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|