Hey guys, I just finished my first electric for a friend and thought I'd share some pics.
Thanks for looking guys.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| First electric build shipping tomorrow! http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=46386 |
Page 1 of 1 |
| Author: | bfeils [ Sun Sep 20, 2015 12:09 pm ] |
| Post subject: | First electric build shipping tomorrow! |
Hey guys, I just finished my first electric for a friend and thought I'd share some pics. Thanks for looking guys. |
|
| Author: | Chris Pile [ Sun Sep 20, 2015 2:24 pm ] |
| Post subject: | Re: First electric build shipping tomorrow! |
SWEETNESS! Make sure you send it FedEx. TO ME. (we're friends, right?) |
|
| Author: | giltzow [ Sun Sep 20, 2015 3:57 pm ] |
| Post subject: | Re: First electric build shipping tomorrow! |
Very nice! Congratulations. It's beautiful - Mike |
|
| Author: | cphanna [ Sun Sep 20, 2015 4:25 pm ] |
| Post subject: | Re: First electric build shipping tomorrow! |
Yum! And I don't even own a solid body. I'm revising my thoughts now! |
|
| Author: | Alex Kleon [ Sun Sep 20, 2015 7:01 pm ] |
| Post subject: | Re: First electric build shipping tomorrow! |
Lucky friend, Brandon! That's a beauty! Alex |
|
| Author: | dzsmith [ Sun Sep 20, 2015 7:33 pm ] |
| Post subject: | Re: First electric build shipping tomorrow! |
Nice-un! |
|
| Author: | bfeils [ Sun Sep 20, 2015 10:18 pm ] |
| Post subject: | Re: First electric build shipping tomorrow! |
Thanks guys! photo credit goes to my brother Justin Feils. |
|
| Author: | JimO [ Wed Sep 23, 2015 5:20 pm ] |
| Post subject: | Re: First electric build shipping tomorrow! |
Awesome Axe dude! |
|
| Author: | Phil J [ Wed Sep 23, 2015 6:13 pm ] |
| Post subject: | Re: First electric build shipping tomorrow! |
Very nice! |
|
| Author: | klooker [ Thu Sep 24, 2015 5:24 pm ] |
| Post subject: | Re: First electric build shipping tomorrow! |
Beautiful! Would you mind sharing some info about the finish technique? Did you stain, spray tinted lacquer, epoxy pore fill.... in other words, how did you get it to look so good? |
|
| Author: | bfeils [ Thu Sep 24, 2015 7:42 pm ] |
| Post subject: | Re: First electric build shipping tomorrow! |
klooker wrote: Beautiful! Would you mind sharing some info about the finish technique? Did you stain, spray tinted lacquer, epoxy pore fill.... in other words, how did you get it to look so good? Thanks! Sure, I masked off the top with automotive pin striping tape and then used a water based aniline dye on the mahogany back, I then used zpoxy to pore fill the back. I don't think I'd use epoxy to pore fill in the future, I sanded through the stain so many trying to level the pore fill so i had to keep re-staining the areas that sanded through. I then masked off the mahogany and the top leaving only the faux binding areas around the periphery exposed and sealed it with vinyl sanding sealer .In the next step I used the same type of aniline dye to stain the top with a dark color and then sanded it back to remove most of the stain leaving it only on the end grain portions of the maple's curl. Next I used a lighter color to stain the sanded back wood. I then used a razor to clean up some of the faux binding around the edges of the top. I then sprayed the whole guitar with a couple coats of sanding sealer and sanded the sealer nice and level. I sprayed the guitar with probably eight coats of nitrocellulose lacquer and then sanded and buffed with micro mesh sanding pads and menerza buffing compounds. It was easily the most difficult and time consuming process of the entire build. I'm pretty happy with the result but I have a lot of room for improvement. |
|
| Author: | klooker [ Fri Sep 25, 2015 6:53 am ] |
| Post subject: | Re: First electric build shipping tomorrow! |
bfeils wrote: ... then used a water based aniline dye on the mahogany back, I then used zpoxy to pore fill the back. I don't think I'd use epoxy to pore fill in the future, I sanded through the stain so many trying to level the pore fill so i had to keep re-staining the areas that sanded through.... That's exactly why I asked. Just gave up on trying to color then pore fill with epoxy for the same reason. My color was getting splotchy from all the touch up. ![[headinwall]](./images/smilies/headbangwalluf8.gif "Mad")
|
|
| Author: | fumblefinger [ Sat Sep 26, 2015 12:29 am ] |
| Post subject: | Re: First electric build shipping tomorrow! |
Chris Pile wrote: SWEETNESS! Make sure you send it FedEx. TO ME. (we're friends, right?) If he sends that to you, you may as well call the cops now. Cause I'm breaking in and stealing it! |
|
| Author: | Hesh [ Sat Sep 26, 2015 9:05 am ] |
| Post subject: | Re: First electric build shipping tomorrow! |
A beauty! |
|
| Author: | bfeils [ Sat Sep 26, 2015 10:44 am ] |
| Post subject: | Re: First electric build shipping tomorrow! |
fumblefinger wrote: Chris Pile wrote: SWEETNESS! Make sure you send it FedEx. TO ME. (we're friends, right?) If he sends that to you, you may as well call the cops now. Cause I'm breaking in and stealing it! Haha That's funny. It arrived on Thursday and the customer was ecstatic! .It was pretty nerve racking being my first commission but it all went well. |
|
| Author: | bfeils [ Sat Sep 26, 2015 10:46 am ] |
| Post subject: | Re: First electric build shipping tomorrow! |
klooker wrote: bfeils wrote: ... then used a water based aniline dye on the mahogany back, I then used zpoxy to pore fill the back. I don't think I'd use epoxy to pore fill in the future, I sanded through the stain so many trying to level the pore fill so i had to keep re-staining the areas that sanded through.... That's exactly why I asked. Just gave up on trying to color then pore fill with epoxy for the same reason. My color was getting splotchy from all the touch up. Yes, in fact I sanded the back down completely just leaving the fill in the pores and re-stained It. I almost forgot about that. |
|
| Author: | Ken McKay [ Sun Sep 27, 2015 7:58 pm ] |
| Post subject: | Re: First electric build shipping tomorrow! |
Nice, congrats! |
|
| Author: | Shaw [ Sun Nov 29, 2015 4:11 am ] |
| Post subject: | Re: First electric build shipping tomorrow! |
That is sweet. Great job. |
|
| Author: | sdsollod [ Sun Nov 29, 2015 11:31 am ] |
| Post subject: | Re: First electric build shipping tomorrow! |
Nicely done! ![[clap]](./images/smilies/smiley32.gif "adulations")
|
|
| Author: | JimO [ Mon Nov 30, 2015 8:57 pm ] |
| Post subject: | Re: First electric build shipping tomorrow! |
Beautiful guitar. Love the carved top. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|