Official Luthiers Forum! :: View topic - New model

Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/

New model http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=46543	Page 1 of 1

Author:	Puresoundguitar [ Fri Oct 23, 2015 7:22 pm ]
Post subject:	New model
Thought i'd share my latest model with you guys. Any questions, just fire away!

Author:	Hesh [ Sat Oct 24, 2015 8:52 am ]
Post subject:	Re: New model
Very nice Daniel! My only suggestion if you want suggestions.... is to consider not beveling your fret ends so very radically and instead shaping them with files while endeavoring to preserve fret crown top surface.... We frequently have players complain about radical bevels such as what I see in your first fret board pic. The string tends to at at times fall off the fret because they are so very close to the radical bevel. It's a real life problem and f*ctories often bevel too much to but they do it because it's easier and cheaper to do a radical bevel than to individually shape fret ends. Just a suggestion - very cool guitar!

Author:	dzsmith [ Sat Oct 24, 2015 10:00 am ]
Post subject:	Re: New model
Look's great Daniel! What woods are used on the fretboard? I'd guess Wenge and ? Really nice look. Dan

Author:	JimO [ Sat Oct 24, 2015 6:29 pm ]
Post subject:	Re: New model
Awesome attention to detail.

Author:	Ken McKay [ Sun Oct 25, 2015 9:44 pm ]
Post subject:	Re: New model
Super Cool!!

Author:	fumblefinger [ Sun Oct 25, 2015 9:56 pm ]
Post subject:	Re: New model
Love the extra routing on the headstock. Is the neck redheart or padauk?

Author:	Puresoundguitar [ Sun Oct 25, 2015 10:43 pm ]
Post subject:	Re: New model
Neck is padauk, with wenge fretboard and canary wood inlays. Thanks for the comments on the headstock, I really appreciate it. This design took me a couple of years to get it just right on paper...now in an actual neck I just love it.

Author:	alan stassforth [ Mon Oct 26, 2015 10:01 am ]
Post subject:	Re: New model
Really nice, Daniel! I like the way you snazzed up the tele design. Inlays are very cool! Ditto on the headstock, and the way all the different woods look together! Alan

Author:	Puresoundguitar [ Mon Oct 26, 2015 6:42 pm ]
Post subject:	Re: New model
Thanks for the comments guys! Hesh, thanks for your observation on the fret bevels. In this case, it was something I did on purpose, because I wanted a really rounded feel of the fretboard edges. The player wanted something like this. Usually, I do a 30deg bevel or less. Which gives a nice compromise between confort and the strings not slipping off. Anything you'd change on the guitar? You can go wild with suggestions... Don't ask for a flux capacitor, apparently flying cars were the only thing that Doc Brown and Marty Mcfly didn't get right for 2015

Author:	J De Rocher [ Mon Oct 26, 2015 8:19 pm ]
Post subject:	Re: New model
That's a very cool take on a Tele. Count me as another fan of your headstock design. Many have tried to do variations on the Tele and Strat headstocks, but very few of them are as good as the originals much less manage to improve on them, which you did IMO. Very nice choice of woods. What is the wood you used for the pickguard and control plate? I don't have any wild suggestions to make. The only niggly one would be to make the headstock label, which I like, a bit smaller so as to not crowd the string tree and the headstock edge. Someone's going to be very happy to have that one.

Author:	Puresoundguitar [ Thu Oct 29, 2015 12:33 pm ]
Post subject:	Re: New model
J De Rocher wrote: That's a very cool take on a Tele. Count me as another fan of your headstock design. Many have tried to do variations on the Tele and Strat headstocks, but very few of them are as good as the originals much less manage to improve on them, which you did IMO. Very nice choice of woods. What is the wood you used for the pickguard and control plate? I don't have any wild suggestions to make. The only niggly one would be to make the headstock label, which I like, a bit smaller so as to not crowd the string tree and the headstock edge. Someone's going to be very happy to have that one. Thanks for your nice comments! The wood used for the pickguard, is Walnut burl, laminated. I have a cool supplier for nice looking veneers, so I laminate my stock in-house for these funky looking pickguards. The headstock label is a very good observation, I'm gonna try it on the next iteration.

Author:	Quine [ Fri Oct 30, 2015 12:07 pm ]
Post subject:	Re: New model
Sweet. I love the inlays an open pore finish on the neck

Author:	lactose [ Tue Nov 24, 2015 10:40 am ]
Post subject:	Re: New model
Wow that is great.

Author:	sdsollod [ Tue Nov 24, 2015 11:12 am ]
Post subject:	Re: New model
Beautiful! Very creative and artistic. Nice all around... Love the pickguard and switch plate and the padauk neck.

Author:	Stuart Gort [ Tue Nov 24, 2015 3:44 pm ]
Post subject:	Re: New model
Interesting wood choices and inlays. Nice.

Author:	Shaw [ Sun Nov 29, 2015 4:08 am ]
Post subject:	Re: New model
Beautiful guitars. i love the woods especially the padauk neck.

Author:	William Bustard [ Sat Feb 06, 2016 12:51 pm ]
Post subject:	Re: New model
Puresoundguitar wrote: Thanks for the comments guys! Hesh, ...Anything you'd change on the guitar? You can go wild with suggestions... ...Marty Mcfly didn't get right for 2015 The guitar turned out very beautiful, the contrast of the woods natural color is great and the fine workmanship clearly shows attention to detail. As far as changing anything? Its tough to find something without nitpicking but... maybe suggest, -the pickguard screw lay out, perhaps reposition to a more symmetrical and make them equidistant?

Author:	James Ringelspaugh [ Sat Feb 06, 2016 5:09 pm ]
Post subject:	Re: New model
Very cool headstock design

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/