Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Fender Toronado
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=46553		 Page 1 of 1
Author:  megatrav [ Mon Oct 26, 2015 11:26 am ]
Post subject:  Fender Toronado
Hi, this is my first post on this forum. I was recommended this site from someone on TGP forum. I have been looking for some who could build me a finished Toronado body with a standard Fender scale length and a wraparound bridge style. I have asked Warmoth if they could do it, but they said that they could not.

If anyone is interested in such a build, please let me know!

Thanks
Author:  megatrav [ Tue Oct 27, 2015 11:50 am ]
Post subject:  Re: Fender Toronado
Anyone?
Author:  Chris Pile [ Tue Oct 27, 2015 3:56 pm ]
Post subject:  Re: Fender Toronado
I think your best bet is to have a Toronado modified, not built from parts or scratch. Would you be interested in that?
Author:  megatrav [ Tue Oct 27, 2015 6:19 pm ]
Post subject:  Re: Fender Toronado
My only problem with that is that I don't want to buy an entire guitar. There would be no need to modify it if I went that route. The reason I want a Fender scale body is so that I can use a Gibson-conversion scale neck on it.
Author:  Chris Pile [ Tue Oct 27, 2015 11:14 pm ]
Post subject:  Re: Fender Toronado
Toronado bodies on eBay if you want to go that route.
Author:  megatrav [ Wed Oct 28, 2015 2:23 am ]
Post subject:  Re: Fender Toronado
Chris Pile wrote:
Toronado bodies on eBay if you want to go that route.


Really? I haven't ever seen any. Can you send me a link?
Author:  megatrav [ Fri Oct 30, 2015 4:43 pm ]
Post subject:  Re: Fender Toronado
There are schematics online. Should I maybe post in a different place on the forum?
Author:  cbrviking [ Sat Oct 31, 2015 5:30 pm ]
Post subject:  Re: Fender Toronado
Travis - I just sent you a PM. Go check it out.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/