***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Mon Nov 25, 2024 12:56 pm


Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 20 posts ] 
  Print view Previous topic | Next topic 
Author Message
bfeils
PostPosted: Sun Sep 20, 2015 12:09 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Jul 30, 2013 11:15 pm
Posts: 69
First name: Brandon
Last Name: Feils
City: PHOENIX
State: AZ
Zip/Postal Code: 85016-6417
Country: United States
Focus: Build
Hey guys, I just finished my first electric for a friend and thought I'd share some pics.

Image

Image

Image

Image

Image

Image

Image


Thanks for looking guys.
Top
 Profile  
 
Chris Pile
PostPosted: Sun Sep 20, 2015 2:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5821
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
SWEETNESS! Make sure you send it FedEx. TO ME. (we're friends, right?)

_________________
"Act your age, not your shoe size" - Prince


These users thanked the author Chris Pile for the post (total 2): Shaw (Sun Nov 29, 2015 4:11 am) • bfeils (Thu Sep 24, 2015 7:17 pm)
Top
 Profile  
 
giltzow
PostPosted: Sun Sep 20, 2015 3:57 pm 
Offline
Contributing Member
Contributing Member

Joined: Fri Jun 04, 2010 10:02 pm
Posts: 313
First name: Michael
Last Name: Giltzow
City: Boise
State: Idaho
Zip/Postal Code: 83709
Country: usa
Focus: Build
Status: Semi-pro
Very nice! Congratulations. It's beautiful - Mike

_________________
guitarsbygiltzow.com


These users thanked the author giltzow for the post: bfeils (Thu Sep 24, 2015 7:17 pm)
Top
 Profile  
 
cphanna
PostPosted: Sun Sep 20, 2015 4:25 pm 
Offline
Koa
Koa

Joined: Sat Apr 19, 2008 10:08 pm
Posts: 1958
Location: Missouri
First name: Patrick
Last Name: Hanna
State: Missouri
Country: USA
Yum! And I don't even own a solid body. I'm revising my thoughts now!


These users thanked the author cphanna for the post: bfeils (Thu Sep 24, 2015 7:16 pm)
Top
 Profile  
 
Alex Kleon
PostPosted: Sun Sep 20, 2015 7:01 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Lucky friend, Brandon! That's a beauty!

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


These users thanked the author Alex Kleon for the post: bfeils (Thu Sep 24, 2015 7:16 pm)
Top
 Profile  
 
dzsmith
PostPosted: Sun Sep 20, 2015 7:33 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2660
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
Nice-un!

_________________
wah
Wah-wah-wah-wah
Wah


These users thanked the author dzsmith for the post: bfeils (Thu Sep 24, 2015 7:16 pm)
Top
 Profile  
 
bfeils
PostPosted: Sun Sep 20, 2015 10:18 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Jul 30, 2013 11:15 pm
Posts: 69
First name: Brandon
Last Name: Feils
City: PHOENIX
State: AZ
Zip/Postal Code: 85016-6417
Country: United States
Focus: Build
Thanks guys! photo credit goes to my brother Justin Feils.
Top
 Profile  
 
JimO
PostPosted: Wed Sep 23, 2015 5:20 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Sep 16, 2009 9:54 pm
Posts: 235
First name: Jim
Last Name: Outman
City: LaGrange
State: GA
Zip/Postal Code: 30240
Country: USA
Focus: Build
Status: Amateur
Awesome Axe dude!


These users thanked the author JimO for the post: bfeils (Thu Sep 24, 2015 7:16 pm)
Top
 Profile  
 
Phil J
PostPosted: Wed Sep 23, 2015 6:13 pm 
Offline
Mahogany
Mahogany

Joined: Sun Oct 12, 2014 7:22 pm
Posts: 75
First name: Phil
Last Name: Joe
State: Nova Scotia
Country: Canada
Focus: Build
Status: Amateur
Very nice!


These users thanked the author Phil J for the post: bfeils (Thu Sep 24, 2015 7:16 pm)
Top
 Profile  
 
klooker
PostPosted: Thu Sep 24, 2015 5:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
Beautiful!

Would you mind sharing some info about the finish technique?

Did you stain, spray tinted lacquer, epoxy pore fill.... in other words, how did you get it to look so good?

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.


These users thanked the author klooker for the post: bfeils (Thu Sep 24, 2015 7:58 pm)
Top
 Profile  
 
bfeils
PostPosted: Thu Sep 24, 2015 7:42 pm 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Jul 30, 2013 11:15 pm
Posts: 69
First name: Brandon
Last Name: Feils
City: PHOENIX
State: AZ
Zip/Postal Code: 85016-6417
Country: United States
Focus: Build
klooker wrote:
Beautiful!

Would you mind sharing some info about the finish technique?

Did you stain, spray tinted lacquer, epoxy pore fill.... in other words, how did you get it to look so good?



Thanks! Sure, I masked off the top with automotive pin striping tape and then used a water based aniline dye on the mahogany back, I then used zpoxy to pore fill the back. I don't think I'd use epoxy to pore fill in the future, I sanded through the stain so many trying to level the pore fill so i had to keep re-staining the areas that sanded through. I then masked off the mahogany and the top leaving only the faux binding areas around the periphery exposed and sealed it with vinyl sanding sealer .In the next step I used the same type of aniline dye to stain the top with a dark color and then sanded it back to remove most of the stain leaving it only on the end grain portions of the maple's curl. Next I used a lighter color to stain the sanded back wood. I then used a razor to clean up some of the faux binding around the edges of the top. I then sprayed the whole guitar with a couple coats of sanding sealer and sanded the sealer nice and level. I sprayed the guitar with probably eight coats of nitrocellulose lacquer and then sanded and buffed with micro mesh sanding pads and menerza buffing compounds.

It was easily the most difficult and time consuming process of the entire build. I'm pretty happy with the result but I have a lot of room for improvement.


These users thanked the author bfeils for the post: klooker (Thu Sep 24, 2015 9:08 pm)
Top
 Profile  
 
klooker
PostPosted: Fri Sep 25, 2015 6:53 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Aug 17, 2010 3:31 pm
Posts: 1682
First name: Kevin
Last Name: Looker
City: Worthington
State: OH
Zip/Postal Code: 43085
Country: USA
Focus: Build
Status: Amateur
bfeils wrote:
... then used a water based aniline dye on the mahogany back, I then used zpoxy to pore fill the back. I don't think I'd use epoxy to pore fill in the future, I sanded through the stain so many trying to level the pore fill so i had to keep re-staining the areas that sanded through....


That's exactly why I asked. Just gave up on trying to color then pore fill with epoxy for the same reason. My color was getting splotchy from all the touch up. [headinwall]

_________________
I'm not a luthier.
I'm just a guy who builds guitars in his basement.
It's better than playing golf.
Top
 Profile  
 
fumblefinger
PostPosted: Sat Sep 26, 2015 12:29 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Jun 08, 2014 10:06 pm
Posts: 414
First name: Allan
Last Name: Bacon
State: Kansas
Country: USA
Focus: Repair
Chris Pile wrote:
SWEETNESS! Make sure you send it FedEx. TO ME. (we're friends, right?)

If he sends that to you, you may as well call the cops now. Cause I'm breaking in and stealing it!


These users thanked the author fumblefinger for the post: bfeils (Sat Sep 26, 2015 10:47 am)
Top
 Profile  
 
Hesh
PostPosted: Sat Sep 26, 2015 9:05 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
A beauty!


These users thanked the author Hesh for the post: bfeils (Sat Sep 26, 2015 10:46 am)
Top
 Profile  
 
bfeils
PostPosted: Sat Sep 26, 2015 10:44 am 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Jul 30, 2013 11:15 pm
Posts: 69
First name: Brandon
Last Name: Feils
City: PHOENIX
State: AZ
Zip/Postal Code: 85016-6417
Country: United States
Focus: Build
fumblefinger wrote:
Chris Pile wrote:
SWEETNESS! Make sure you send it FedEx. TO ME. (we're friends, right?)

If he sends that to you, you may as well call the cops now. Cause I'm breaking in and stealing it!


Haha That's funny. It arrived on Thursday and the customer was ecstatic! .It was pretty nerve racking being my first commission but it all went well.


Last edited by bfeils on Sat Sep 26, 2015 11:21 am, edited 1 time in total.

Top
 Profile  
 
bfeils
PostPosted: Sat Sep 26, 2015 10:46 am 
Offline
Mahogany
Mahogany
User avatar

Joined: Tue Jul 30, 2013 11:15 pm
Posts: 69
First name: Brandon
Last Name: Feils
City: PHOENIX
State: AZ
Zip/Postal Code: 85016-6417
Country: United States
Focus: Build
klooker wrote:
bfeils wrote:
... then used a water based aniline dye on the mahogany back, I then used zpoxy to pore fill the back. I don't think I'd use epoxy to pore fill in the future, I sanded through the stain so many trying to level the pore fill so i had to keep re-staining the areas that sanded through....


That's exactly why I asked. Just gave up on trying to color then pore fill with epoxy for the same reason. My color was getting splotchy from all the touch up. [headinwall]


Yes, in fact I sanded the back down completely just leaving the fill in the pores and re-stained It. I almost forgot about that.
Top
 Profile  
 
Ken McKay
PostPosted: Sun Sep 27, 2015 7:58 pm 
Offline
Koa
Koa

Joined: Fri Jan 25, 2008 9:55 am
Posts: 982
Location: Traverse City Michigan
Nice, congrats!

_________________
Ken


These users thanked the author Ken McKay for the post: bfeils (Thu Feb 18, 2016 6:39 pm)
Top
 Profile  
 
Shaw
PostPosted: Sun Nov 29, 2015 4:11 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2011 2:21 am
Posts: 668
Location: Philadelphia
First name: Michael
Last Name: Shaw
City: Philadelphia
State: PA
Zip/Postal Code: 19125
Country: USA
Focus: Repair
Status: Semi-pro
That is sweet. Great job.

_________________
Another day, another dollar.


These users thanked the author Shaw for the post: bfeils (Thu Feb 18, 2016 6:39 pm)
Top
 Profile  
 
sdsollod
PostPosted: Sun Nov 29, 2015 11:31 am 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Nicely done! [clap] [clap] [clap]

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


These users thanked the author sdsollod for the post: bfeils (Thu Feb 18, 2016 6:39 pm)
Top
 Profile  
 
JimO
PostPosted: Mon Nov 30, 2015 8:57 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Sep 16, 2009 9:54 pm
Posts: 235
First name: Jim
Last Name: Outman
City: LaGrange
State: GA
Zip/Postal Code: 30240
Country: USA
Focus: Build
Status: Amateur
Beautiful guitar. Love the carved top.


These users thanked the author JimO for the post: bfeils (Thu Feb 18, 2016 6:39 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 20 posts ] 

Board index » Electric Guitar & Bass Construction

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 43 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com