| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Ibanez Artist http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=47267 |
Page 1 of 1 |
| Author: | Tyson.k [ Sat Feb 13, 2016 12:47 am ] |
| Post subject: | Ibanez Artist |
Does anyone know the widthXhight of the body of a Ibanez artist? I found some plans but they lack that feature. Any help would be great. Thanks, Tyson k |
|
| Author: | J De Rocher [ Sat Feb 13, 2016 11:35 pm ] |
| Post subject: | Re: Ibanez Artist |
I have an '82 AR500. Dimensions are: Lower bout width = 13 3/8" upper bout width = 9 1/2" length from tail to neck joint = 15 5/8" thickness = 1 7/8" Artists have had various thicknesses. If I remember right, they were a bit thicker in the 70s. |
|
| Author: | Tyson.k [ Sat Feb 13, 2016 11:36 pm ] |
| Post subject: | Re: Ibanez Artist |
Awesome thanks a million Tyson k |
|
| Author: | J De Rocher [ Sat Feb 13, 2016 11:38 pm ] |
| Post subject: | Re: Ibanez Artist |
And, width across the waist = 7 3/4" |
|
| Author: | Tyson.k [ Sat Feb 13, 2016 11:39 pm ] |
| Post subject: | Re: Ibanez Artist |
Cool super helpful thanks! Tyson k |
|
| Author: | J De Rocher [ Sat Feb 13, 2016 11:45 pm ] |
| Post subject: | Re: Ibanez Artist |
You bet. Good luck with your build. |
|
| Author: | Tyson.k [ Sat Feb 13, 2016 11:45 pm ] |
| Post subject: | Re: Ibanez Artist |
Thanks man! Tyson k |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|