| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Bridge replacement http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=48516 |
Page 1 of 1 |
| Author: | GregMuller [ Wed Nov 09, 2016 8:54 pm ] |
| Post subject: | Bridge replacement |
I am working on a late 60's kent 531 MIJ guitar. I am trying to replace the fixed bridge with a ABR-1 bridge. The problem is the string spacing on the saddle and the pickups is 42mm and the ABR-1 bridge I have has the string spacing at 52mm. Does anyone know of a bridge that has a spacing closer to 42mm or a way to modify the ABR-1 or any other bridge for that matter closer to the spacing I need. I would even consider changing the saddle also if I can get one that is closer to the spacing I need but I can not seem to find one. The currant one is a tremlo saddle but I would take anything that will fit. |
|
| Author: | Sandywood [ Thu Nov 10, 2016 11:36 am ] |
| Post subject: | Re: Bridge replacement |
http://www.stewmac.com/Hardware_and_Par ... ridge.html Might be your best shot. |
|
| Author: | GregMuller [ Thu Nov 10, 2016 12:15 pm ] |
| Post subject: | Re: Bridge replacement |
It's a solid body guitar plus that bridge is too big for the space. |
|
| Author: | Freeman [ Thu Nov 10, 2016 12:24 pm ] |
| Post subject: | Re: Bridge replacement |
A picture of the present bridge/saddle would help. All the ToM's that I'm familiar with are in the 51-52 mm string spacing. Don't forget too that most ToM's are 12 inch radius - make sure that is compatible with your fretboard. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|