| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Gretsch 6120 templates? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=48888 |
Page 1 of 1 |
| Author: | Glenn LaSalle [ Fri Jan 20, 2017 3:17 pm ] |
| Post subject: | Gretsch 6120 templates? |
Hi Guys, I have been concentrating on building acoustic guitars, but I have always wanted a '59 Gretsch 6120. Has anyone built one before? or know of any plans, templates, pointers, etc? Thanks! Glenn |
|
| Author: | Freeman [ Fri Jan 20, 2017 6:12 pm ] |
| Post subject: | Re: Gretsch 6120 templates? |
I just finished a 17 inch hollow body (look down the list of posts to "Jazzy Blond". It is basically a 4 inch deep 17 inch jumbo, laminated spruce top and laminated maple b/s. While similar to the Gretsch, it is not a direct copy, but I do have the tracing of the ribs and quite a few pictures of the insides. I do have plans for an ES-175 which I used for some of the bracing and other tidbits. Let me know if any of this would help. |
|
| Author: | Christopher Parker [ Sun Jan 22, 2017 3:45 pm ] |
| Post subject: | Re: Gretsch 6120 templates? |
Never built one before, but I've had em apart. FWIW, the neck joint is not a dovetail. It's a mortise and tenon. Not sure where you can find a plan for one, but you could trace the body contours on an existing one, and take measurements for the neck, elevated fingerboard extension, etc. Definitely a worthwhile project. Good luck, and post pics! |
|
| Author: | dzsmith [ Sun Jan 22, 2017 10:30 pm ] |
| Post subject: | Re: Gretsch 6120 templates? |
http://www.gitarrebassbau.de/download/f ... c598b253f3 |
|
| Author: | Glenn LaSalle [ Mon Jan 23, 2017 5:38 am ] |
| Post subject: | Re: Gretsch 6120 templates? |
Thanks Guys! Glenn |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|