| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Supplier options for figured tops http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=48915 |
Page 1 of 1 |
| Author: | Irving [ Wed Jan 25, 2017 12:42 am ] |
| Post subject: | Supplier options for figured tops |
I've bought a lot of redwood and walnut tops from http://tonewood.com/guitar-wood/solid-b ... woods.html Are there any other suppliers that use the same method of picturing the exact top you're buying? |
|
| Author: | Freeman [ Wed Jan 25, 2017 11:48 am ] |
| Post subject: | Re: Supplier options for figured tops |
That is pretty common, LMII does it for their "special" sets. Gilmer in Portland routinely posts pictures of each set, as does Notable in Seattle (when I bought some koa from Bruce he wetted the plates with alcohol to pop the grain and set me pictures so I could be sure) https://www.gilmerwood.com/categories/3 ... d/products http://www.notablewoods.com/gallery/index.html I've ordered archtop sets from a couple of sources who posted pictures on their websites. |
|
| Author: | Irving [ Wed Jan 25, 2017 12:18 pm ] |
| Post subject: | Re: Supplier options for figured tops |
Freeman wrote: That is pretty common, LMII does it for their "special" sets. Gilmer in Portland routinely posts pictures of each set, as does Notable in Seattle (when I bought some koa from Bruce he wetted the plates with alcohol to pop the grain and set me pictures so I could be sure) https://www.gilmerwood.com/categories/3 ... d/products http://www.notablewoods.com/gallery/index.html I've ordered archtop sets from a couple of sources who posted pictures on their websites. Oh yes I forgot about Gilmer. Good source. Thanks! |
|
| Author: | dzsmith [ Wed Jan 25, 2017 7:07 pm ] |
| Post subject: | Re: Supplier options for figured tops |
Gobywalnut.com is a good source for walnut and maple. I've bought some nice redwood from them as well. |
|
| Author: | B. Howard [ Fri Jan 27, 2017 8:32 am ] |
| Post subject: | Re: Supplier options for figured tops |
http://www.keimlumber.com/solidbodyblanks http://www.northridgehardwoods.com/SolidBodyTops.htm http://www.hibdonhardwood.com/pages/electric-woods |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|