Just to show off the beauty of this top
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Twist and a cup in top wood http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=48934 |
Page 1 of 1 |
| Author: | XevKai [ Sun Jan 29, 2017 8:33 pm ] |
| Post subject: | Twist and a cup in top wood |
So quick question. I have a set of walnut tops that I'd like to use on a p-bass build. One side has a cup, one side a twist. I don't want to really try and plane out the defects cause it'll take too much wood away. I was thinking about just taking a gamble and gluing it down with a crap ton of weight on top to flatten it. Would that work? Any other options I may not be thinking about? |
|
| Author: | XevKai [ Sun Jan 29, 2017 8:40 pm ] |
| Post subject: | Re: Twist and a cup in top wood |
Just to show off the beauty of this top
|
|
| Author: | truckjohn [ Mon Jan 30, 2017 12:04 am ] |
| Post subject: | Re: Twist and a cup in top wood |
Iron it out with a clothes iron set on nuclear and then pile a bunch of weight on it. You will feel it relax when it gets good and hot. Although with the cathedral grain - it's probably mostly flat sawn and may not straighten... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|