More about body finishing. Buying a fancy XGP maple neck from GF.
Going to French Polish using Ubeaut Hard Shellac.
First step finished. Sanded to 1200 grit
Sent from my SM-G920I using Tapatalk
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Tassy Blackwood Tele Build http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=49381 |
Page 1 of 1 |
| Author: | GourmetSaint [ Fri May 19, 2017 7:25 pm ] |
| Post subject: | Tassy Blackwood Tele Build |
More about body finishing. Buying a fancy XGP maple neck from GF. Going to French Polish using Ubeaut Hard Shellac. First step finished. Sanded to 1200 grit Sent from my SM-G920I using Tapatalk |
|
| Author: | GourmetSaint [ Fri May 19, 2017 7:59 pm ] |
| Post subject: | Re: Tassy Blackwood Tele Build |
1st 50/50 sealing layer.  Sent from my SM-G920I using Tapatalk |
|
| Author: | GourmetSaint [ Fri May 19, 2017 10:32 pm ] |
| Post subject: | Re: Tassy Blackwood Tele Build |
Rubber made. Ready for first session of bodying.  Sent from my SM-G920I using Tapatalk |
|
| Author: | GourmetSaint [ Fri May 19, 2017 10:55 pm ] |
| Post subject: | Re: Tassy Blackwood Tele Build |
First layers...  Sent from my SM-G920I using Tapatalk |
|
| Author: | GourmetSaint [ Sat May 20, 2017 4:37 pm ] |
| Post subject: | Re: Tassy Blackwood Tele Build |
After 1st day. Ready to start 2nd day.   Sent from my SM-G920I using Tapatalk |
|
| Author: | GourmetSaint [ Mon May 22, 2017 1:41 am ] |
| Post subject: | Re: Tassy Blackwood Tele Build |
After day 2   Sent from my SM-G920I using Tapatalk |
|
| Author: | GourmetSaint [ Sun Jun 18, 2017 12:07 am ] |
| Post subject: | Re: Tassy Blackwood Tele Build |
Finally finished. I had a mishap with a bridge screw head shearing off flush with body and a bridging wire missing on the 4 way switch. Action and intonation set.       Sent from my SM-G920I using Tapatalk |
|
| Author: | Chris Pile [ Sun Jun 18, 2017 7:39 am ] |
| Post subject: | Re: Tassy Blackwood Tele Build |
Excellent finishing job! Tell me more about that gaudy peghead. |
|
| Author: | GourmetSaint [ Mon Jun 19, 2017 3:44 am ] |
| Post subject: | Re: Tassy Blackwood Tele Build |
Chris Pile wrote: Excellent finishing job! Tell me more about that gaudy peghead. Aussie abalone shell Sent from my SM-G920I using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|