| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| How to extend the life of a file http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=51552 |
Page 1 of 1 |
| Author: | jrdnvctrmyr [ Sun Feb 03, 2019 11:28 am ] |
| Post subject: | How to extend the life of a file |
I want to ask how long will a file last and how do I extend their lifespan? And how do I keep them sharp? Specifically nut/saddle and fret files. The ones I've always been using get dull really quick. Especially my nut slotting files which are stainless steel Uo-Chikyu Files. These are made in Japan and are really good quality. They cut easily, clean, and straight. I only use a 3 corner file to shape bone and I also notice that it gets clogged after 3-5 minutes of use. |
|
| Author: | Chris Pile [ Sun Feb 03, 2019 12:15 pm ] |
| Post subject: | Re: How to extend the life of a file |
Many of the files I have are at least 40 years old, still in good shape, and provide good service. I clean them often, and store them well to prevent damage. Your nut files are NOT stainless - they are case hardened steel. Apparently, you are not cleaning your files as you work. Do you have a file card to clean them? Or a brass bristled brush? Even wiping the file on a cloth while you work will clear the gullets of chips and pins. |
|
| Author: | jrdnvctrmyr [ Sun Feb 03, 2019 9:56 pm ] |
| Post subject: | Re: How to extend the life of a file |
Thanks for the reply Chris. Yeah I have a brass one and I brush them when I see that the file's surface is clogged with the material. Should I put something like wax or oil while I use them? I'm afraid putting wax/oil would affect the bone I'm working on. Not sure about the files not being stainless because the guy I ordered it from told me that they were transitioning from the old material to stainless when I bought them. I should buy the stewmac ones. |
|
| Author: | Chris Pile [ Mon Feb 04, 2019 12:32 am ] |
| Post subject: | Re: How to extend the life of a file |
I've never treated my files, but Dan Erlewine used to put some kind of wax on his. |
|
| Author: | jrdnvctrmyr [ Mon Feb 04, 2019 10:06 am ] |
| Post subject: | Re: How to extend the life of a file |
Thank you Chris. *I just realized there is an older post just like this in the Board index ยป Instrument Restoration and Repair section. ADMINS, I would like to request this thread to be deleted. Sorry for not searching first. Thanks. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|