Chris Pile wrote:
What kind of finish will you be using? Most will form a nice radius all by its lonesome.....
Chris, I’ll be using Mohawk nitro lacquer
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| How to deal with an inside corner when finishing? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10123&t=54489 |
Page 1 of 1 |
| Author: | dzsmith [ Tue Oct 19, 2021 9:59 am ] |
| Post subject: | How to deal with an inside corner when finishing? |
I’m planning ahead. I’m not sure how to deal with inside corners. I will apply Zpoxy to the Mahogany and Maple prior to spraying nitro. I won’t be able to sand and polish the sharp corner. I have an idea to apply and build up Zpoxy using a syringe to create a radius and scrape or sand it smooth. Any other ideas? Thanks a bunch, Dan |
|
| Author: | Chris Pile [ Tue Oct 19, 2021 1:53 pm ] |
| Post subject: | Re: How to deal with an inside corner when finishing? |
What kind of finish will you be using? Most will form a nice radius all by its lonesome..... |
|
| Author: | dzsmith [ Tue Oct 19, 2021 2:03 pm ] |
| Post subject: | Re: How to deal with an inside corner when finishing? |
| Chris Pile wrote: What kind of finish will you be using? Most will form a nice radius all by its lonesome..... Chris, I’ll be using Mohawk nitro lacquer |
|
| Author: | Chris Pile [ Tue Oct 19, 2021 3:18 pm ] |
| Post subject: | Re: How to deal with an inside corner when finishing? |
I think that would work fine, Dan - depending on the number of coats. You do plan on breaking the top edge a bit with sandpaper? Just enough to ease the corner? |
|
| Author: | dzsmith [ Tue Oct 19, 2021 6:25 pm ] |
| Post subject: | Re: How to deal with an inside corner when finishing? |
Thanks Chris! Yes, I plan to round over the edges. |
|
| Author: | Chris Pile [ Tue Oct 19, 2021 6:51 pm ] |
| Post subject: | Re: How to deal with an inside corner when finishing? |
After that sneak peak I'm interested in how it turns out. Keep us posted. |
|
| Author: | dzsmith [ Sun Dec 05, 2021 4:43 pm ] |
| Post subject: | Re: How to deal with an inside corner when finishing? |
The zpoxy filled the sharp corners. The instrument is ready for lacquer (probably next year]. I used Freeman’s technique of applying zpoxy over the Maple and then spraying a tinted lacquer. It looks great, with nice chatoyance. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|