Official Luthiers Forum! • View topic

Board index » Mandolin - Mandola - Ukulele Forum

All times are UTC - 5 hours

Forum rules

Same rules apply to all forums at the Luthiers Forum.

Plate joining jig

Page 1 of 1

[ 1 post ]

Print view

Previous topic | Next topic

Author

Message

bcombs510

Post subject: Plate joining jig

Posted: Wed Mar 10, 2021 11:12 pm

Brazilian Rosewood

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3596
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur

I made a ukulele sized plate joining jig on the CNC. It’s based on the LMI design but is adjustable for different plate sizes, soprano through baritone. I put the CNC files, materials list and instructions here - https://tinyurl.com/44pfwcn2

There is a DXF, a Vectric CRV, and a Word document with details. Here are some pics for reference:

Hope that helps.

Brad

Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars

Top

Page 1 of 1

[ 1 post ]

Board index » Mandolin - Mandola - Ukulele Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 37 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: