Hello all,
Do any of you have or know where to download a 1:1 a Gibson A series snakehead headstock pattern?
Like the headstock in this photo:
thanks,
chris
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| snakehead http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10128&t=27317 |
Page 1 of 1 |
| Author: | Chris Oliver [ Sun May 09, 2010 10:35 am ] |
| Post subject: | snakehead |
Hello all, Do any of you have or know where to download a 1:1 a Gibson A series snakehead headstock pattern? Like the headstock in this photo: thanks, chris |
|
| Author: | jmanter [ Sun May 09, 2010 12:26 pm ] |
| Post subject: | Re: snakehead |
I would try Roger Siminoff... |
|
| Author: | Chris Oliver [ Sun May 09, 2010 4:11 pm ] |
| Post subject: | Re: snakehead |
Thanks... ok... looking for a free download or pattern, first. chris |
|
| Author: | Alain Lambert [ Sun May 09, 2010 8:13 pm ] |
| Post subject: | Re: snakehead |
Take scale This photo scale it to size and print it. |
|
| Author: | Chris Oliver [ Mon May 10, 2010 10:04 am ] |
| Post subject: | Re: snakehead |
Thanks Alain... I figured I would have to do that if no one had a pattern. I used a different photo and altered the scales a bit and this is what I came up with.   Hope you're not ophidiophobic! I still can't figure out why folks pay more for these snakehead headstocks? Oooieee! |
|
| Author: | Haans [ Thu Jun 10, 2010 7:08 am ] |
| Post subject: | Re: snakehead |
Actually Chris, they are mostly paying for two things; closeness to 1923, the supposed magical date of the holy grail of mandolins, and more important (for builders), the truss rod, which is the major contributor to the tonal change in A models, and also the contributor to narrower necks. |
|
| Author: | Chris Oliver [ Thu Jun 10, 2010 7:22 am ] |
| Post subject: | Re: snakehead |
Haans, I really appreciate your willingness to impart your experience. Is the magical date (1923) you speak of for both the f and a.... and, in your experience, are these Loar era models any better sounding than today's? thanks. |
|
| Author: | Haans [ Thu Jun 10, 2010 9:09 pm ] |
| Post subject: | Re: snakehead |
Seems as though the closer you get to 1923, no matter what you've got, the price jumps. 'Course if you have a F with ff holes, you have 150-200K in your hands. Do they sound better than modern extremely well built instruments? Well, yes and no. They sound 90 years old, but I believe that in 90 years, some of the instruments built today will sound better. You have to remember that then as now, a new Loar would have sounded pretty stiff and would likely take a real pounding for about 3 years or so to make it sound like anything. Loars were built relatively thick, and some builders today are building right next to the edge of collapse. That will get you a very resonant mandolin, maybe thin sounding, but those instruments will never sound like a Loar...FAT. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
