| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Inlay on head stock . http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10128&t=27336 |
Page 1 of 1 |
| Author: | WudWerkr [ Tue May 11, 2010 8:56 am ] |
| Post subject: | Inlay on head stock . |
I would like to know if anyone in the forum does inlay work that hires out their talents to do so for others . I would like to have some inlays in my head pieces , however its not an area that really intrest me to learn . Maybe some day ,but for now , anyone want to do some inlay work? 
|
|
| Author: | MRS [ Sat May 15, 2010 12:59 am ] |
| Post subject: | Re: Inlay on head stock . |
Do you use headstock overlays? I'm sure there are people out there that would inlay head plates for you which would be much cheaper then sending the entire instrument or neck....Mike |
|
| Author: | WudWerkr [ Sat May 15, 2010 6:51 am ] |
| Post subject: | Re: Inlay on head stock . |
MRS wrote: Do you use headstock overlays? I'm sure there are people out there that would inlay head plates for you which would be much cheaper then sending the entire instrument or neck....Mike Sorry , thought i was clear . Thats what i want to do . Inlays on a head plate ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Author: | Chris Oliver [ Mon May 17, 2010 2:19 pm ] |
| Post subject: | Re: Inlay on head stock . |
James, Bob Garrish, of the forum, does inlay headplates. He uses a cnc process and it is economical if you order many. He can produce just the inlay pieces or produce them and add to your or his headplate stock. Make sure you get your headstock logo refined. Once he gets your graphic in the computer, it is more $ to change it. bob at saintlutherie dot com http://www.saintlutherie.com good luck. |
|
| Author: | dunwell [ Wed Jun 23, 2010 10:15 am ] |
| Post subject: | Re: Inlay on head stock . |
Also check out Todd Reith at http://www.customluthier.com/ He was part of our Colorado Luthiers before he went to the dark side and moved east. He did some very nice work for me. Alan D. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|