Michael:
I mic'd the low G on a set of Aquila tenors at 0.030-0.031"dia.
You could try Dr Cluck on Ebay.
Bob
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Ukulele String Gauges http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10128&t=27872 |
Page 1 of 1 |
| Author: | Michael [ Wed Jun 16, 2010 8:58 pm ] |
| Post subject: | Ukulele String Gauges |
I just finished building 5 Tenor ukes and would like to string them using a low G (4th string). I have 10 sets of regular G tuning strings gauged from the first, A .028 nylon, E .036 nylon, C .036 wound, G .032 nylon. I need to change the 4th nylon string to a low G wound string. I just can't seem to find out what gauge would be a proper replacement. I can buy sets with a low G but I already have 10 purchased. Anyone out there help?? Michael |
|
| Author: | unkabob [ Wed Jun 16, 2010 11:53 pm ] |
| Post subject: | Re: Ukulele String Gauges |
Michael: I mic'd the low G on a set of Aquila tenors at 0.030-0.031"dia. You could try Dr Cluck on Ebay. Bob
|
|
| Author: | Michael [ Thu Jun 17, 2010 2:02 am ] |
| Post subject: | Re: Ukulele String Gauges |
Thanks Bob, what you measured is the #4 string for the regular G tuning. I need a gauge to make that string an octave lower. I might try a #4 guitar string and see what happens. Michael |
|
| Author: | Quine [ Thu Jun 17, 2010 1:20 pm ] |
| Post subject: | Re: Ukulele String Gauges |
Hmm....Sounds like you should just make 10 more Hi-G tenors now.  I found one low G gauge listed.....Worth strings at Elderly list a wound low G string = 0.0358" or 0.91mm Maybe you should post on the Ukulele Underground forums and ask if other brands vary much |
|
| Author: | Michael [ Thu Jun 17, 2010 6:30 pm ] |
| Post subject: | Re: Ukulele String Gauges |
Thanks guys. If I use a low G I have to have a compensated saddle. Improvising is challaging with a high G 4th string so low G it has to be. Today I tried a D #4 nylon string on a tenor I have in my store and it sounded pretty good. Here is a quick pic of the 5 tenors before finish...  Michael |
|
| Author: | Quine [ Fri Jun 18, 2010 1:04 pm ] |
| Post subject: | Re: Ukulele String Gauges |
mmm..those look really nice!! How about some construction details? |
|
| Author: | Michael [ Fri Jun 18, 2010 5:50 pm ] |
| Post subject: | Re: Ukulele String Gauges |
Okay, I placed a few more poictures here.. viewtopic.php?f=10128&t=27888 For any more detail, I would be glad to answer any questions. Michael |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|