| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| First time Z-Poxy User http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10128&t=28597 |
Page 1 of 1 |
| Author: | WudWerkr [ Fri Aug 13, 2010 9:09 am ] |
| Post subject: | First time Z-Poxy User |
I have tried the Z Poxy for the first time and am Liking the results . I have some experience to put in to be better at application !   What im not sure about is the Cure time Prior to Spraying Laq. Ive read in search , some say 24 hrs between coats of z poxy some say 48 , however there really isnt a suggestion on cure time before laq. At least I didnt see one . Any suggestions ? How long do most people wait ? Thanks |
|
| Author: | Fred Tellier [ Fri Aug 13, 2010 12:13 pm ] |
| Post subject: | Re: First time Z-Poxy User |
If the Z-poxy was hard enough to sand out it is cured. |
|
| Author: | James W B [ Fri Aug 13, 2010 6:02 pm ] |
| Post subject: | Re: First time Z-Poxy User |
24 works fine for me. James |
|
| Author: | WudWerkr [ Mon Aug 16, 2010 7:13 pm ] |
| Post subject: | Re: First time Z-Poxy User |
waited 24 hrs sanded and lacqured and ,,,,,, man I love this stuff !!! ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Author: | Keith Lally [ Mon Aug 16, 2010 7:20 pm ] |
| Post subject: | Re: First time Z-Poxy User |
Do you sand it all the way back to wood leaving z-poxy in the pores only or do you leave it on as a base clear coat, level it out, and then laquer over it? |
|
| Author: | Fred Tellier [ Mon Aug 16, 2010 8:48 pm ] |
| Post subject: | Re: First time Z-Poxy User |
I put a couple light coats of shellac between the Z-poxy and the lacquer to help the bonding between them. Besides the blond shellac makes the top look nice and it brings out the look of the wood. I am just starting to lacquer the 5 guitar I did with Z-poxy, I think I have it mastered finally, each one went easier than the one before. Fred |
|
| Author: | WudWerkr [ Sun Aug 29, 2010 11:03 am ] |
| Post subject: | Re: First time Z-Poxy User |
Keith Lally wrote: Do you sand it all the way back to wood leaving z-poxy in the pores only or do you leave it on as a base clear coat, level it out, and then laquer over it? I sanded just to level out and left a clear coat and then applied a second coat . Since it was first effort Im not sure thats best , however it did turn out quite nice . |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|