Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Wood Identity for New Mandola
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10128&t=29949
Page 1 of 1

Author:  WudWerkr [ Wed Nov 17, 2010 10:49 am ]
Post subject:  Wood Identity for New Mandola

I bought this off ebay , which turned out good this time . Usally Im a bit skeptic on buying from ebay . It was listed as "Paduck" Payed $10.00 for 2 pieces . However in looking at stuff here I wonder if it isnt " Bubinga " Can anyone tell from the pics . The Sawdust is real fine and almost bright orange .

What do I have here

Attachment:
100_0843.jpg
Attachment:
100_0844.jpg

Author:  CharlieT [ Wed Nov 17, 2010 8:35 pm ]
Post subject:  Re: Wood Identity for New Mandola

I'm no expert on either wood, but the photos look more like padauk to me.

Author:  dunwell [ Thu Nov 18, 2010 11:26 am ]
Post subject:  Re: Wood Identity for New Mandola

That looks like padauk to me too. Your description of the sanding/sawdust sounds right too. When I resawed before I had my big dust collection system my whole shop was orange :P Great wood, I really like its acoustics. It can be prone to spliting along the grain so watch that when bending, leave the sides a bit long so if they check in a bit it won't matter.

Alan D.

Author:  Chris Oliver [ Fri Nov 19, 2010 8:27 am ]
Post subject:  Re: Wood Identity for New Mandola

James,

Here is a link to some fresh cut padauk. Does yours look this bright when fresh?

fresh cut padauk set

Author:  WudWerkr [ Fri Nov 19, 2010 9:01 am ]
Post subject:  Re: Wood Identity for New Mandola

Yep , Its paduck ! Whats the diffrence then in Paduck and bubinga ? I have seen Pics of Bubinga that look almost exactly the same ? Are they per chance the same " Family"

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/