Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Re-Lacquer after buffing ?
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10128&t=31415		 Page 1 of 1
Author:  WudWerkr [ Tue Mar 08, 2011 10:40 am ]
Post subject:  Re-Lacquer after buffing ?
I have been buffing out a finish and using buffing compound and have buffed through at one spot . [headinwall] . Now I have to re- spray the neck and headstock . Since I have used a buffing compond , do I need to clean it with somthing befor respray and if yes , whats recommended ? idunno

This is first time ive had to do this , dont wanna mess it up further .

Also , On my mandos , I have been using about a pint of laq. , how much do you spray , am I being to "thrifty" with the laq. ? Is this why I Buffed through, not enough coats ?

Please chime in with your suggestions .
Author:  Jim Watts [ Tue Mar 08, 2011 2:54 pm ]
Post subject:  Re: Re-Lacquer after buffing ?
Wipe it down with naptha and give it a light sanding prior to spraying again.
Author:  WudWerkr [ Tue Mar 08, 2011 7:40 pm ]
Post subject:  Re: Re-Lacquer after buffing ?
Thanks , Jim . I wll give that a try. As for the amount of laq you use per build ? how much do you spray on the average
Author:  Chris Oliver [ Tue Mar 08, 2011 7:50 pm ]
Post subject:  Re: Re-Lacquer after buffing ?
James... +1 on Jim's recommendation. And, it is not how much you put on... but how much you leave on.

I know that doesn't help, but I heard a very famous mando builder say it once and had to chuckle. duh

Good luck! Maybe a spirit varnish next time? idunno Can't wait to see it!
Author:  WudWerkr [ Wed Mar 09, 2011 8:47 am ]
Post subject:  Re: Re-Lacquer after buffing ?
Chris Oliver wrote:
James... +1 on Jim's recommendation. And, it is not how much you put on... but how much you leave on.

I know that doesn't help, but I heard a very famous mando builder say it once and had to chuckle. duh

Good luck! Maybe a spirit varnish next time? idunno Can't wait to see it!



laughing6-hehe laughing6-hehe pfft laughing6-hehe laughing6-hehe
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/