Quote:
I'm looking for insight into the angle of the headstock, not the neck
Doh!
From the looks of it here, Terry over at Crystal Mountain is using 16.5 at the headstock and 3.5 neck angle.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Headstock Angle http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10128&t=34897 |
Page 1 of 1 |
| Author: | George L [ Mon Jan 09, 2012 2:24 pm ] |
| Post subject: | Headstock Angle |
I'm working out the details of my first mandolin, which is going to be built in a simple Army-Navy style. I've found enough reference material to put together some basic plans, but I'm not sure about the angle of the headstock. Is 15 degrees the correct headstock angle for this type of instrument? Thanks, |
|
| Author: | Chris Oliver [ Mon Jan 09, 2012 4:12 pm ] |
| Post subject: | Re: Headstock Angle |
George, There is some specific discussion on the matter at the other forum: http://www.google.com/search?q=army+navy+mandolin+neck+angle&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a It appears that 1 to 2 1/2 degrees is the range used. Good luck! |
|
| Author: | George L [ Mon Jan 09, 2012 8:05 pm ] |
| Post subject: | Re: Headstock Angle |
Chris, Thanks for your reply. That thread has some very useful information, but right now I'm looking for insight into the angle of the headstock, not the neck. (Although it's great to have confirmation of that measurement as well!) I've been quietly browsing the Mandolin Cafe for the past couple of weeks--lots of great info over there. Looks like another nice group of people, too. Thanks again, |
|
| Author: | Chris Oliver [ Tue Jan 10, 2012 9:32 am ] |
| Post subject: | Re: Headstock Angle |
Quote: I'm looking for insight into the angle of the headstock, not the neck Doh! From the looks of it here, Terry over at Crystal Mountain is using 16.5 at the headstock and 3.5 neck angle. |
|
| Author: | George L [ Tue Jan 10, 2012 10:40 am ] |
| Post subject: | Re: Headstock Angle |
Thanks again, Chris. I'm looking forward to getting this mandolin project started. I'd better get going, too, as I'm building this for the OLF Challenge! |
|
| Author: | Quine [ Tue Jan 10, 2012 1:34 pm ] |
| Post subject: | Re: Headstock Angle |
15deg is pretty typical for peg head tuners. If you're worried the best way is to draw out the head stock from the front and side views....including the tuners. You can see if any strings overlap. |
|
| Author: | Bryan Bear [ Sat Jan 14, 2012 6:30 pm ] |
| Post subject: | Re: Headstock Angle |
Something else I have learned form experience. When you are drawing up the peghead design and determining the angle on short thin instruments, it is a good idea to draw it out with the whole neck and body too. I ended up with an instrument that rested on the tail and tuning key knob when laid on its back. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|