Made my own for M&T.
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Dovetail Jig? http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10128&t=45243 |
Page 1 of 1 |
| Author: | Allen Ughoc [ Fri Feb 27, 2015 12:31 pm ] |
| Post subject: | Dovetail Jig? |
I'm still working on my first, Hana Lima Ia tenor plan, w/ Spanish heel. I want to build my next with a dovetail and saw that Luthier Tools has a dovetail jig and wondered if anyone here uses it and their thoughts on the jig. I like the StewMac jig for guitars. Thanks. |
|
| Author: | Ben-Had [ Fri Feb 27, 2015 1:55 pm ] |
| Post subject: | Re: Dovetail Jig? |
Big discussion on this recently, here: viewtopic.php?f=10101&t=45140&hilit=dovetail+jig |
|
| Author: | Allen Ughoc [ Fri Feb 27, 2015 5:21 pm ] |
| Post subject: | Re: Dovetail Jig? |
Ben-Had wrote: Thanks, good info, jig seems a little "temperamental". Reads like they're all talking about the guitar jig. Wondering if any uke builders have used the uke dovetail jig. Thanks again. |
|
| Author: | Aaron O [ Sat Feb 28, 2015 1:07 am ] |
| Post subject: | Re: Dovetail Jig? |
Made my own for M&T.
|
|
| Author: | Allen Ughoc [ Sat Feb 28, 2015 12:43 pm ] |
| Post subject: | Re: Dovetail Jig? |
Thanks Aaron, nice workstation, looks like something I need to adopt. Seems most builders use the M&T, wonder why it's preferred over a dovetail. I've built two guitars using the StewMac jig and like the idea of the dovetail neck joint. Still very much in the "infant" stage of building instruments, a carpenter since the '80's, need all the help I can get. |
|
| Author: | Aaron O [ Sat Feb 28, 2015 10:14 pm ] |
| Post subject: | Re: Dovetail Jig? |
Couple of guys from the BIUG came over last year (or was it the other year) and took notes of the jig. Not sure if its still there, but pics were posted on their site. Its loosely based on Robby O'Brien's neck angle jig, which can be found everywhere. Personally it took me long enough to do a M&T, much less a dovetail, which is a much harder joint to execute, double angles notwithstanding. My path went from butt, to bolt on, to current. I'll stay here for a while. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|