| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Gauged Nut Slotting File Set for Ukulele, http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10128&t=51900 |
Page 1 of 1 |
| Author: | Steve-atl [ Mon May 06, 2019 2:22 pm ] |
| Post subject: | Gauged Nut Slotting File Set for Ukulele, |
Stewmac has a set of gauged nut slotting files for ukulele, on sale for $42.52. Are these worth the money? There is only 3 files. Thanks |
|
| Author: | johnparchem [ Mon May 06, 2019 10:03 pm ] |
| Post subject: | Re: Gauged Nut Slotting File Set for Ukulele, |
Do you need those three files? If so it may be worth buying. I use my guitar files. |
|
| Author: | Hesh [ Tue May 07, 2019 7:53 pm ] |
| Post subject: | Re: Gauged Nut Slotting File Set for Ukulele, |
It also depends on your situation as John said. If you're only cutting a few nuts slots ever perhaps not. If you're a commercial business repairing guitars, ukes and the like absolutely. I use gauged nut slot files and have every gauge out there and I am replacing files from wearing them out every year or so. |
|
| Author: | unkabob [ Sat Dec 14, 2019 8:44 pm ] |
| Post subject: | Re: Gauged Nut Slotting File Set for Ukulele, |
I use a set of welding torch cleaners. I start using a hacksaw blade 0.018" to locate the string and use a torch cleaner about five thou greater than the string diameter toset the action. The torch cleaners are round files of various diameters from twenty five thou to fifty five thou. you can find them at Harbor Freight. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|