| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Question about Binding http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10130&t=31591 |
Page 1 of 1 |
| Author: | thebolo [ Thu Mar 24, 2011 11:06 am ] |
| Post subject: | Question about Binding |
Hello everyone, I'm new here. Not sure if this is the right category but o well. I'm having some problems routing the binding channel. I've tried several different methods and havent got a very good result. What is a good jig thats kind of stupid proof (if there is such a thing)? Thanks for the help |
|
| Author: | enalnitram [ Thu Mar 24, 2011 12:47 pm ] |
| Post subject: | Re: Question about Binding |
there's a tutorial section here. i just went there and looked for binding. viewtopic.php?f=10117&t=19654 |
|
| Author: | Alain Desforges [ Fri Mar 25, 2011 6:24 pm ] |
| Post subject: | Re: Question about Binding |
Well, I think you'll find that binding guitars, or specifically, routing out the channel is very high on the 'stress inducing procedure' for most builders. From personal experience, I prefer a jig that will register from the side of the guitar. IMO, it's easier to have a consistent channel that way. I did build a jig for this, however, I'm at work and I don't have any pictures with me here. I will try to dig those up tomorrow. It's also a good idea to use a kind of tool to score around the top, back and sides to avoid any kind of blow-out... I use a Gramil. Good luck! |
|
| Author: | Zach Ehley [ Sun Mar 27, 2011 11:41 am ] |
| Post subject: | Re: Question about Binding |
Can we get this moved out of Doc-u-build? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|