Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 21, 2024 6:14 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 23 posts ] 
Author Message
PostPosted: Tue Mar 21, 2017 10:06 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
I'm catching up posting documentation of one of two 00's I've been working on. Both are built on Ken's KMG 00 12 fret template in the mega-mold. This combo has worked great for me.

Sitka top
Red spruce bracing
Ziricote Back and sides
Ebony binding - likely with b/w/b purfling and Blue Pau bling.
Rosette - 3 ring, with Blue Pau
Slot head
Waverly brass 3 on a plate with ebony tuner
Pyramid bridge
1 3/4 nut

First, make sure the humidity is right on
Image


Last edited by dpetrzelka on Tue Nov 13, 2018 11:36 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Mar 21, 2017 10:08 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Image

Image

Image

Image

Image


Last edited by dpetrzelka on Tue Nov 13, 2018 11:39 am, edited 2 times in total.

Top
 Profile  
 
PostPosted: Tue Mar 21, 2017 10:11 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Homemade bending jig, with controller taken from a glass kiln I built years earlier.

Image

Image


Last edited by dpetrzelka on Tue Nov 13, 2018 11:42 am, edited 2 times in total.

Top
 Profile  
 
PostPosted: Tue Mar 21, 2017 10:14 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Resawing brace stock - .25" throughout. This saw was rescued from a friend - the tension block had broken, and it needed a new home. It's about time I invest in a new blade though.

Image


Last edited by dpetrzelka on Tue Nov 13, 2018 11:42 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Mar 21, 2017 10:15 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
More to come - just need to get photos uploaded.


Top
 Profile  
 
PostPosted: Tue Mar 21, 2017 10:27 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1703
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
I am not sure wood and plane porn are allowed on this site. I may have to report it. Looks like it will be a great looking guitar.

_________________
http://www.Harvestmoonguitars.com



These users thanked the author johnparchem for the post: dpetrzelka (Tue Mar 21, 2017 10:55 am)
Top
 Profile  
 
PostPosted: Tue Mar 21, 2017 11:03 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Thanks John - If I'm going to break the rules, I might as well keep going.


Top
 Profile  
 
PostPosted: Tue Mar 21, 2017 11:07 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
I prefer to hand plane the radius in my top and back braces. Moving forward I'm going to build a simple jig to make this step just a little quicker and more precise.

Image

And gluing up the x-brace. Coming from the KMG process, I still use card stock radius cauls. They work really well, and I make up extras or different radii whenever needed.

For go-bars I'm using simple oak strips, with lightly rounded edges.

Image


Last edited by dpetrzelka on Tue Nov 13, 2018 11:43 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Mar 21, 2017 11:11 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Image


A 16" fretboard radius block works great for putting a gentle radius on my back strips. I run masking tape down both outside edges of the block, protecting the back from the abrasive. When the edges of the block touch the back I'm done.

Image

I knew I held on to all of these old baseball cards for a reason - protecting the back reinforcing strip while shaping the back braces.

Image


Last edited by dpetrzelka on Tue Nov 13, 2018 1:12 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Mar 21, 2017 11:13 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Blue Pau inlay for the rosette, purfling, headstock and the fretboard.

Image

Image

Image

Image


Last edited by dpetrzelka on Tue Nov 13, 2018 1:16 pm, edited 2 times in total.

Top
 Profile  
 
PostPosted: Tue Mar 21, 2017 11:15 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
How do you build a guitar?

Simple. Just remove everything that isn't essential.

Image

Lots of wood removed from the top bracing during the voicing process.


Last edited by dpetrzelka on Tue Nov 13, 2018 1:11 pm, edited 1 time in total.


These users thanked the author dpetrzelka for the post: Pmaj7 (Tue Nov 13, 2018 3:53 pm)
Top
 Profile  
 
PostPosted: Tue Mar 21, 2017 11:17 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
The rim is ready.

Image

The top goes on first so I can still make final voicing adjustments before closing the box.

Image

Getting close on the bracing, just needs the final cleanup and sanding.

Image

Image


Last edited by dpetrzelka on Tue Nov 13, 2018 11:51 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Mar 21, 2017 11:20 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Pressing frets before gluing the board on the neck. This makes fret installation really easy, but I'm rethinking this approach as I study more. (Hesh, take it easy, I'll come around)

Image


Last edited by dpetrzelka on Tue Nov 13, 2018 11:49 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Mar 21, 2017 11:21 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Label applied and back cleaned up prior to closing the box.

Image


Last edited by dpetrzelka on Tue Nov 13, 2018 11:49 am, edited 2 times in total.

Top
 Profile  
 
PostPosted: Wed Mar 22, 2017 7:00 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
Very nice work. Great wood selection, and pretty rosette.

Ed



These users thanked the author Ruby50 for the post: dpetrzelka (Wed Mar 22, 2017 7:03 pm)
Top
 Profile  
 
PostPosted: Wed Mar 22, 2017 8:11 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1703
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
Very nice, phenomenal pictures as well.

_________________
http://www.Harvestmoonguitars.com



These users thanked the author johnparchem for the post: dpetrzelka (Wed Mar 22, 2017 9:50 pm)
Top
 Profile  
 
PostPosted: Wed Mar 14, 2018 10:44 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Image

Image

Image


Last edited by dpetrzelka on Tue Nov 13, 2018 11:48 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Wed Mar 14, 2018 10:45 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
I learned a few things from Robbie O'Brien's French Polishing videos...

Image


Last edited by dpetrzelka on Tue Nov 13, 2018 11:45 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Wed Mar 14, 2018 10:45 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Out in the wild...

Image


Last edited by dpetrzelka on Tue Nov 13, 2018 11:45 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Wed Mar 14, 2018 10:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
And here is an image from the evening I finally presented, literally, the finished Ziricote 00-12 to its final owner.

This was at a design retreat we do annually. I spent some time speaking about and demonstrating tap tones of tonewoods, their characteristics and how they can be combined for different tonal effect before suggesting that its easier to understand in a completed instrument. I then presented the finished guitar and invited a number of friends from the audience to demo it for the group.

Image


Last edited by dpetrzelka on Tue Nov 13, 2018 11:44 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Thu Mar 15, 2018 6:58 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7375
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Nice guitar! I like doc-u-builds. Wish more people did them. I find it most valuable when folks share their techniques for various processes, I've learned a lot that way.

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post: dpetrzelka (Thu Mar 15, 2018 7:25 pm)
Top
 Profile  
 
PostPosted: Tue Nov 13, 2018 1:17 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
Fixed all of the broken image links - thanks all for the heads up. Things should look good again.


Top
 Profile  
 
PostPosted: Tue Nov 13, 2018 3:56 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2257
Location: Seattle WA
Focus: Build
Status: Semi-pro
dpetrzelka wrote:
How do you build a guitar?

Simple. Just remove everything that isn't essential.

Image

Lots of wood removed from the top bracing during the voicing process.
I like it, just get a chunk of wood and remove all the non guitar part!

Great build log and pics too, looks like a beauty!

New username, same ole Pat Macaluso!

_________________
Pat



These users thanked the author Pmaj7 for the post: dpetrzelka (Tue Nov 13, 2018 4:03 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com