Hooks up jumper cables to get the thread started !
| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| "Soprano" guitar http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10133&t=37340 |
Page 1 of 1 |
| Author: | Chas Freeborn [ Fri Aug 03, 2012 12:38 pm ] |
| Post subject: | "Soprano" guitar |
Mine will be one of my Po'Boy models, which is based on a pre-war Gibson L-00 model. As these were very cheap guitars to begin with I think it will be a good base platform to work from. A design I've been anxious to try is a "Soprano" guitar. No, it does not involve organized crime.... As some of you know I like to experiment with different scale lengths and tunings, which has resulted in my Alto model. It is intended to be tuned down 2 full steps from C to C. This time I'll go the other direction and go up 2 steps and tune from G to G. It will be exactly as if you've put a capo @ 2. So a 1st position E chord shape will be a G chord, an so on. Preliminary sketches look like I'll base it on a 25.7 scale starting @ 2nd fret. 13 frets clear of the body. Wood will all be lumberyard stock that I'll re-saw, including the Sitka top. I may have to 3 or 4 piece the top, but that's okay for this project. Finish will be hand rubbed gel polyurethane, maybe a hand rubbed burst as well. Fingerboard and bridge will be plain Jane rosewood, binding and inlays basic plastic. Should be fun. I'll work up the cost breakdown when I rustle up the materials. Ciao! -C |
|
| Author: | WudWerkr [ Mon Nov 19, 2012 2:05 pm ] |
| Post subject: | Re: "Soprano" guitar |
Hooks up jumper cables to get the thread started !
|
|
| Author: | PeterF [ Tue Nov 20, 2012 3:39 am ] |
| Post subject: | Re: "Soprano" guitar |
He's already started in a different thread! viewtopic.php?f=10133&t=38054 |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|