Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 21, 2024 6:00 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 99 posts ]  Go to page Previous  1, 2, 3, 4
Author Message
PostPosted: Tue Jun 04, 2013 7:40 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Well... all was not lost! oops_sign I started trying to clean up the neck/head to see if it would work for the test mule build. As it were, after some tidying up and rearranging, I decided to keep it with this build. The headstock looks a little wonky in this picture, but it is the camera angle and shadows.
Attachment:
2013-06-04 18.55.58.jpg


So, on to carving the neck! Happiness is a sharp chisel, and fragrant mahogany!

Attachment:
2013-06-04 19.17.53.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Thu Jun 13, 2013 9:36 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
I'm finished with the neck. I haven't previously stained my necks, but I wanted to on this one as John mentioned liking darker necks. I didn't want to put an opaque stain on it, so I started digging around. Sixgunguitars had a video on youtube about using oil paint as a stain under tru oil. As it turns out, Windsor & Newton's Artisan series oil paints are pigment suspended in a linseed oil base--same as tru oil. I bought a tube of "burnt umber" at my local Hobby Lobby and tested it on scrap. It is VERY easy to apply, and did not have the normal issues of witness lines and blotchiness. It also filled the pores with pigment (I don't pore fill). All things considered, I'll definitely be using this technique again. I will let it dry for a couple of days prior to the first tru oil coat on the neck just for good measure. The youtube poster also mentioned that you can dissolve the oil paint in tru oil for a tinted finish. I may give that a try just to see what difference it makes. Here's a few pics. Looks like I'll be wrapping this build up fairly soon....
Attachment:
2013-06-13 21.13.22.jpg

Attachment:
2013-06-13 21.13.31.jpg

Attachment:
2013-06-13 21.14.15.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Fri Jun 14, 2013 5:10 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
That looks good, I have a scrap neck or two laying around.


Top
 Profile  
 
PostPosted: Sat Jun 29, 2013 7:42 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Just a quick update. Been working in spurts, but my dang day job is soaking up a lot of time.... Neck is finished, and bolted in place. I'll do some finish touch-up, and then glue the fretboard extension down, and put some lock washers on the neck bolts. It's close now....
Attachment:
DSC_5925.JPG

Attachment:
2013-06-28 21.45.24.jpg

Attachment:
2013-06-28 21.46.28.jpg

Attachment:
2013-06-28 21.46.53.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sat Jun 29, 2013 7:59 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Very pretty, sophisticated little guitar, that top is insane.


Top
 Profile  
 
PostPosted: Fri Jul 12, 2013 1:42 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Slowly moving forward.... May have strings on by the weekend.

Neck is now on....
Attachment:
2013-07-09 20.12.04.jpg


And preparing the top to glue the bridge....
Attachment:
2013-07-12 13.37.07.jpg


I can smell the end now!!!!


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Fri Jul 12, 2013 6:08 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Oct 16, 2012 1:23 am
Posts: 262
First name: nick
Last Name: dingle
Focus: Build
Status: Amateur
Looking great, jay. Your logo is very elegant.


Top
 Profile  
 
PostPosted: Fri Jul 19, 2013 4:58 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
All done. Tinkering with fretwork and setup, but the tone is coming up nicely! Here's a teaser until I can get everything polished up and ready for good photography...

Attachment:
2013-07-18 06.04.08.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Fri Jul 19, 2013 5:53 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Thats exceptional, can't wait to hear a sound clip.


Top
 Profile  
 
PostPosted: Sat Jul 20, 2013 8:41 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7375
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Great job!

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
PostPosted: Thu Oct 31, 2013 10:21 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 13, 2010 12:46 am
Posts: 1247
First name: Beth
Last Name: Mayer
City: Tucson
State: AZ
Country: United States
Focus: Build
Status: Amateur
You ever make a clip on this beauty, Jay?


Top
 Profile  
 
PostPosted: Thu Oct 31, 2013 10:41 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Beth, I am still working on being able to upload a larger-framed version for the voting... but here is a sneak peek. It is much better in full-screen HD if you have a broadband connection. The pictures are much clearer in HD... Pictures and video to follow in voting thread. :mrgreen:




These users thanked the author Jaybird840 for the post: ntredwell (Fri Nov 01, 2013 12:00 pm)
Top
 Profile  
 
PostPosted: Fri Nov 01, 2013 6:22 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Wow what a little monster! :mrgreen:


Top
 Profile  
 
PostPosted: Fri Nov 01, 2013 9:20 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Oct 07, 2010 5:28 pm
Posts: 687
First name: Casey
Last Name: Cochran
City: Gainesville
State: GA
Zip/Postal Code: 30501
Country: USA
Focus: Build
It's magnificent, Jay. Well done. Your friend is going to be floored.

_________________
Good judgement comes from experience. Experience comes from poor judgement.


Top
 Profile  
 
PostPosted: Fri Nov 01, 2013 1:13 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 13, 2010 12:46 am
Posts: 1247
First name: Beth
Last Name: Mayer
City: Tucson
State: AZ
Country: United States
Focus: Build
Status: Amateur
Just…WOW! I want to see video of John getting the guitar!!!! Please post that.

I'm impressed with every part of your build…the combination of woods, the appointments (especially tying the rosette and purfling in with the end flash), and your fit and finish, but most importantly…the incredible range and sound. You definitely hit this one out of the park!
After seeing the quality of work done in this New Builder's challenge, I am amazed.
Thanks for the sneak peak! Beth


Top
 Profile  
 
PostPosted: Mon Nov 11, 2013 6:40 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
The look on his face right here made the whole build worth it. I drove to Ft. Worth and set it on the stage at one of his gigs--It was waiting for him when he got there to set up. I will post a video soon of John playing it...

Attachment:
IMG_0311.JPG


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Tue Nov 12, 2013 12:06 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 13, 2010 12:46 am
Posts: 1247
First name: Beth
Last Name: Mayer
City: Tucson
State: AZ
Country: United States
Focus: Build
Status: Amateur
That is so amazingly cool, Jay! Can't wait to see/hear that clip :) You should be so proud.


Top
 Profile  
 
PostPosted: Tue Nov 12, 2013 4:54 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6256
Location: Virginia
That's fantastic and surly going to be up there in the ranks!


Top
 Profile  
 
PostPosted: Tue Nov 12, 2013 4:56 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5821
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Cute as can be!

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
PostPosted: Fri Dec 27, 2013 6:07 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Beth,
I'm just now getting around to catching up on some housekeeping details. Here is a video of John being introduced to his new guitar. It is just a quick shot of him picking on it for the first time, and getting to know it. Since getting it in October, he's turned it into one of his regular acoustic gig guitars.



--Jay


Top
 Profile  
 
PostPosted: Sun Dec 29, 2013 1:30 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Jan 13, 2010 12:46 am
Posts: 1247
First name: Beth
Last Name: Mayer
City: Tucson
State: AZ
Country: United States
Focus: Build
Status: Amateur
Jaybird840 wrote:
Beth,
I'm just now getting around to catching up on some housekeeping details. Here is a video of John being introduced to his new guitar. It is just a quick shot of him picking on it for the first time, and getting to know it. Since getting it in October, he's turned it into one of his regular acoustic gig guitars.



--Jay


Amazing little Blues maker you've created! And it's clearly in perfect hands with John….really great, Jay! Congrats again and thanks for including the clip. It's the most fun part!!! Happy New Year and here's to lots of future creations :)


Top
 Profile  
 
PostPosted: Sun Dec 29, 2013 5:00 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Dec 30, 2012 10:04 pm
Posts: 712
First name: Doug
Last Name: Balzer
City: Calgary
State: Alberta
Country: Canada
Focus: Build
Status: Semi-pro
Sweet Jay. Really sweet.

_________________
Doug

Don't let fear or common sense stop you from trying to build something


Top
 Profile  
 
PostPosted: Thu Feb 27, 2014 4:43 pm 
Offline
Cocobolo
Cocobolo

Joined: Wed Feb 19, 2014 7:48 am
Posts: 121
First name: Justin
Last Name: North
City: Chattanooga
State: TN
Zip/Postal Code: 37416
Country: USA
Focus: Build
Status: Amateur
I know this thread is pretty old at this point, and I had seen the finished product in the actual challenge thread, but this is such an amazing little instrument I had to post my congratulations to Jay not only for having won, but for having built an exceptional guitar.

I'm working (slowly) on my first build, a Martin OO style, and this thread has truly inspired me to keep going despite setbacks.

Jay - how has the Tru Oil finish held up as Mr. Sprott has been gigging with the guitar? I have watched several "tutorial" type videos about it, and you achieved an absolutely beautiful finish. My only question was whether or not it would hold up under heavy use/gigging.

Congratulations again, Jay. Absolutely stunning, both in craftsmanship and in tone!


Top
 Profile  
 
PostPosted: Thu Feb 27, 2014 5:58 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Apr 03, 2012 12:47 pm
Posts: 298
First name: Jay
Last Name: Swann
City: Austin
State: TX
Zip/Postal Code: 78739
Country: USA
Focus: Build
Status: Amateur
Justin, thank you for the kind words... I'll check with John to see on the durability of the Tru-Oil. Also, I read your small-body, glassy tone thread, and will reply this evening when I can attach some pics. Thanks again!!! --jay



These users thanked the author Jaybird840 for the post: JustinNorth (Thu Feb 27, 2014 11:26 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 99 posts ]  Go to page Previous  1, 2, 3, 4

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com