Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

Daves build
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10134&t=38827		 Page 1 of 1
Author:  dazzer [ Tue Jan 08, 2013 1:58 pm ]
Post subject:  Daves build
Hi this will be my second build and will be based on a Taylor Grand Symphony.

I will be using the following materials (although this might change)

B&S - Australian Blackwood
Top - Lutz
Bracing - Lutz
Neck - Mahogany
FB - Ebony
Bridge & Headplate - Ebony - Figured Australian Blackwood
Bindings - Holly or Curly Maple

Things might change as I come to build it but hopefully it should be as it is here. Many thanks to Wud for starting this hopefully I will finish this :)

All the best
Dave
Author:  Casey Cochran [ Tue Jan 08, 2013 2:41 pm ]
Post subject:  Re: Daves build
Sounds great. Got any zoot pics of the blackwood yet?
Author:  dazzer [ Tue Jan 08, 2013 3:00 pm ]
Post subject:  Re: Daves build
Casey Cochran wrote:
Sounds great. Got any zoot pics of the blackwood yet?


I haven't took a picture of the Blackwood yet Casey but I will - its fantastic and really highly figured I bought it a few years ago from a seller in Australia!

All the best
Dave
Author:  dazzer [ Wed Jan 09, 2013 9:14 am ]
Post subject:  Re: Daves build
Here you go Casey I took a few pictures of the Blackwood :)

I have a few different boards the figured boards are 42" x 11" x 1" and 40" x 5" x 2" all of them are Qtr sawn :)

I've lightly sprayed the boards with water:

Here are the boards for the backs:

Image

Another picture of the backs:

Image

Here's the side billet:

Image

Another picture of the side billet

Image

I've decided that on the first few builds that I will use some different Blackwood that's not so figured and I will save the better boards for later builds :)

Here are the billets that I will be using:

Image

They are both 2" thick and have some light curl.

I'm in the middle of building my heating set-up and once I have that done I will be building a mold and bending pattern.

Thanks for looking :)
Dave
Author:  Tony_in_NYC [ Wed Jan 09, 2013 9:29 am ]
Post subject:  Re: Daves build
That is some nice looking wood.
Author:  Casey Cochran [ Wed Jan 09, 2013 9:41 am ]
Post subject:  Re: Daves build
Wow! Very nice.
Author:  WudWerkr [ Wed Jan 09, 2013 9:47 am ]
Post subject:  Re: Daves build
I like that wood ! [:Y:]
Author:  wtholmwood [ Thu Jan 31, 2013 4:16 am ]
Post subject:  Re: Daves build
Really like that Blackwood mate, where did you get it?

Will
Author:  dazzer [ Thu Jan 31, 2013 5:39 am ]
Post subject:  Re: Daves build
wtholmwood wrote:
Really like that Blackwood mate, where did you get it?

Will


Hi Will

I bought the Blackwood from http://www.misancraftwood.com/ who are in Tasmania Australia.

Its run by a husband and wife team (Mike and Sandra) and they are great to deal and I've bought quite a bit from them.

If you cannot see what you want then ask as they will normally get hold of what you need.

They are also on Ebay http://stores.ebay.com/Misan-Craftwood?_trksid=p2047675.l2563

All the best
Dave
Author:  wtholmwood [ Thu Jan 31, 2013 6:36 am ]
Post subject:  Re: Daves build
Cheers mate. Just had a quick look at their site. Some nice stuff there. Will have a proper look later.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/