| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Tayser #1 http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10134&t=40506 |
Page 1 of 1 |
| Author: | Tayser [ Wed May 29, 2013 5:55 pm ] |
| Post subject: | Tayser #1 |
Im not in the contest because i started the build a year ago. I have not finished it yet but started working on it again and thought this maybe the push I need to finish it. I carved my own neck and screwed up the first fret board I put on it. thats where i stopped last May or June. So this year I put a new finger board on and fretted. Now i need to start routing out the cavities on the body. heres some pics. |
|
| Author: | Tayser [ Wed May 29, 2013 6:03 pm ] |
| Post subject: | Re: Tayser #1 |
work I did this year on the new finger board |
|
| Author: | Tayser [ Wed May 29, 2013 6:06 pm ] |
| Post subject: | Re: Tayser #1 |
frets pressed in. as you can see my truss rod access is pretty rough. I will do a much better job next time. Theres many things I will do differently on my next build. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|