Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Nov 21, 2024 5:29 pm


All times are UTC - 5 hours





Post new topic Reply to topic  [ 45 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Custom/misc shapes
PostPosted: Tue Feb 19, 2013 7:31 pm 
Offline
Site Admin
User avatar

Joined: Mon Dec 27, 2004 5:02 am
Posts: 8551
Location: United States
First name: Lance
Last Name: Kragenbrink
City: Vandercook Lake
State: Michigan
Zip/Postal Code: 49203
Country: USA
Focus: Build
Status: Semi-pro
Custom/misc shapes

_________________
Support the OLF! Bookmark our STEWMAC link Today!
Lance@LuthiersForum.com


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Wed Feb 20, 2013 2:12 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Feb 15, 2006 7:37 am
Posts: 4805
This fits the miscellaneous more than the shapes, but for a while in there I was making drums. The toms in this set were veneered in Karelian Birch, the bass was painted with chalk board paint. Veneering the shells was a PITA. I basically had to cut out a million little circles out of construction foam to stuff into the shell so the vacuum wouldn't turn them into 5-ply maple ovals.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Thu Feb 21, 2013 1:17 am 
Offline
Koa
Koa
User avatar

Joined: Tue Jan 20, 2009 12:41 am
Posts: 605
Location: LaCrosse WI
First name: Jason
Last Name: Moe
City: LaCrosse
State: WI
Zip/Postal Code: 54601
Country: USA
Focus: Build
Status: Semi-pro
This custom shape is from my Campfire Series. It is called "Allanque Lowaneu". A native American term for "Star of the North". Top is Engelmann spruce, sides are African Mahogany, Back is Ovangkol with inlay. Binding is Curly Sycamore. Binded Madagascar Ebony fretboard. The rosette was made out of a Silver Maple stick my son, Wyatt (3 at the time found in the backyard. He told me I could have his stick to make a guitar out of it. So I made the rosette out of it. I cut it on the bias and it worked out great. One of my favorite guitars.


You do not have the required permissions to view the files attached to this post.

_________________
Jason Moe
LaCrosse WI 54601


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Sat Feb 23, 2013 10:48 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Dec 05, 2009 3:51 pm
Posts: 1203
First name: Chris
Last Name: Ensor
City: Springfield
State: Missouri
Focus: Build
Status: Professional
A couple of my ES shape:

All Walnut:

Attachment:
all walnut 1.jpg


Attachment:
all walnut 2.jpg


EIR/Lutz:

Attachment:
eir lutz 1.jpg


Attachment:
eir lutz 2.jpg


Attachment:
eir lutz 3.jpg


Attachment:
eir lutz 4.jpg


You do not have the required permissions to view the files attached to this post.

_________________
ELEVATE || Next Level Lutherie
http://elevatelutherie.com
&
http://ensorguitars.com


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Sat Feb 23, 2013 10:52 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Dec 05, 2009 3:51 pm
Posts: 1203
First name: Chris
Last Name: Ensor
City: Springfield
State: Missouri
Focus: Build
Status: Professional
Auditoriums:

Maple/Sitka:

Attachment:
maple auditorium 1.jpg


Attachment:
maple auditorium 2.jpg


Attachment:
maple auditorium 3.jpg


Attachment:
maple auditorium 4.jpg


African Mahogany/Englemann:

Attachment:
mahog auditorium 1.jpg


Attachment:
mahog auditorium 2.jpg


Attachment:
mahog auditorium 3.jpg


You do not have the required permissions to view the files attached to this post.

_________________
ELEVATE || Next Level Lutherie
http://elevatelutherie.com
&
http://ensorguitars.com


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Sat Feb 23, 2013 10:55 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Dec 05, 2009 3:51 pm
Posts: 1203
First name: Chris
Last Name: Ensor
City: Springfield
State: Missouri
Focus: Build
Status: Professional
Concert Shape:

Walnut/Englemann:

Attachment:
walnut concert 1.jpg


Attachment:
walnut concert 2.jpg


Attachment:
walnut concert 3.jpg


Attachment:
walnut concert 4.jpg


Zebra/Sitka (the control freak):

Attachment:
control freak 1.jpg


Attachment:
control freak 2.jpg


Attachment:
control freak 3.jpg


You do not have the required permissions to view the files attached to this post.

_________________
ELEVATE || Next Level Lutherie
http://elevatelutherie.com
&
http://ensorguitars.com


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Sat Mar 23, 2013 7:36 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
One of my Standard Grand Auditorium models. Completely my own shape and design. This one is Engleman/ Mahogany, Ebony FB, bridge and peg head face. All wood bindings and purflings, all wood rosette. French Polish finish.
Attachment:
IMG_2926.JPG


Attachment:
IMG_2937.JPG


Attachment:
IMG_2941.JPG


Attachment:
IMG_2952.JPG


You do not have the required permissions to view the files attached to this post.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Sun Sep 08, 2013 7:46 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
I look at what you guys do and am in awe of the Talent . One day maybe I will get there . Sweet Builds Guys !

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Sun Sep 08, 2013 11:40 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat May 17, 2008 1:11 pm
Posts: 2371
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build
Status: Semi-pro
This one rattled around in my addled brain for a few years before it finally took shape. I've always like the petite upper bout of the L-00, and added more padding to the derriere.

Attachment:
DSC_0008 - Version 3.jpg


Attachment:
DSC_0077 - Version 5.jpg


Attachment:
DSC_0028 - Version 2.jpg


You do not have the required permissions to view the files attached to this post.

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com



These users thanked the author Pat Foster for the post (total 2): Haans (Fri Jul 21, 2017 7:59 am) • Bobc (Thu Jul 20, 2017 10:22 am)
Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Sun Sep 08, 2013 10:00 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 05, 2013 12:57 pm
Posts: 903
Location: London, England
Focus: Build
Status: Amateur
Nothing to contribute, just going to sit back and enjoy the show! Eat Drink
Amazing work here!


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Wed Feb 12, 2014 9:07 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 21, 2012 11:52 am
Posts: 1388
First name: Zeke
Last Name: McKee
City: Goodlettsville
State: TN
Zip/Postal Code: 37070
Country: United States
Focus: Build
Status: Amateur
Wenge/Englemann

Ebony bridge, fretboard

Curly euro maple neck with bloodwood center strip and black fiber strips

Bloodwood binding

Custom shape, OM size

Image
Image
Image
ImageImage
Image
Image


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Wed Feb 12, 2014 10:28 pm 
Offline
Contributing Member
Contributing Member

Joined: Mon Jul 11, 2011 12:43 am
Posts: 1326
Location: chicagoland, illinois
City: chicagoland
State: illinois
Country: usa
Focus: Build
Status: Amateur
made this some years ago; in pieces and hasn't seen action in some time(like a lot of my stuff)....just made it for the sake of wackiness. a notable memory was watching as a buddy ripped out a blues solo on it in a basement jam, eyes soulfully closed like carlos santana. hilarious actually


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Thu Feb 20, 2014 11:37 am 
Offline
Koa
Koa

Joined: Fri Mar 31, 2006 4:54 pm
Posts: 713
Location: United States
First name: nick
Last Name: fullerton
City: Vallejo
State: ca
Zip/Postal Code: 94590
Country: usa
Focus: Build
Status: Amateur
here's a few random build pics:


You do not have the required permissions to view the files attached to this post.

_________________
"Preoccupation with an effect gives it power and enhances the error"
from "Your Owner's Manual" by Burt Hotchkiss.


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Mon Apr 28, 2014 10:39 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Feb 25, 2013 4:34 pm
Posts: 223
First name: Kent
Last Name: Wilkinson
City: New Carlisle
State: Ohio
Zip/Postal Code: 45344
Country: USA
Focus: Build
Stick dulcimer. chromatic fret lay out. Blood wood, mahogany, zebra wood. pre band ivory inlay. diamond inlay in the sound hole. bone nut. Ebony bridge. This is my first ever complete build.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Tue Apr 29, 2014 9:08 am 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1906
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Here's one of mine. Basically, an OM with florentine cutaway...


You do not have the required permissions to view the files attached to this post.

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Wed Jul 19, 2017 3:55 pm 
Offline
Walnut
Walnut

Joined: Sat Nov 09, 2013 9:58 pm
Posts: 30
First name: Trent
State: Iowa
Country: United States
Focus: Build
Status: Amateur
deleted


Last edited by woodgood on Wed Feb 28, 2024 11:38 pm, edited 8 times in total.

Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Thu Jul 20, 2017 10:24 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 9:42 pm
Posts: 4217
Location: Buffalo, NY
First name: Robert
Last Name: Cefalu
City: Buffalo
State: NY
Zip/Postal Code: 14217
Country: US
Pat how do you get such a good fit around the diamond volute?

_________________
Beautiful and unusual tone woods at a reasonable price.
http://www.rctonewoods.com/RCT_Store
The Zootman
1109 Military Rd.
Kenmore, NY 14217
(716) 874-1498


Last edited by Bobc on Thu Jul 20, 2017 10:25 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Thu Jul 20, 2017 10:25 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2257
Location: Seattle WA
Focus: Build
Status: Semi-pro
woodgood wrote:
Extra long scale acoustic bass without sound hole.

Wood, could you share your concept with that?

Sent from my SM-G930T using Tapatalk

_________________
Pat


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Thu Jul 20, 2017 10:39 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2257
Location: Seattle WA
Focus: Build
Status: Semi-pro
Chris Ensor wrote:
Attachment:
maple auditorium 3.jpg

Chris, is that radial purfling or is that figured grain we are seeing in the purfling? Nice either way!


Sent from my SM-G930T using Tapatalk

_________________
Pat


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Thu Jul 20, 2017 2:12 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Mar 15, 2013 5:31 am
Posts: 221
First name: Bob
Last Name: Orr
Focus: Build
Status: Amateur
Resonator, all walnut based on OM size and shape but with a deeper body, Sound hole same pattern as on metal cover. Scoop cutaway and sound port. 14 frets to the body.
Cheers, Bob
Attachment:
1.JPG

Attachment:
2.JPG

Attachment:
3.JPG

Attachment:
4.JPG


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Thu Jul 20, 2017 10:41 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Nov 24, 2008 12:17 pm
Posts: 1168
City: Escondido
State: CA
Zip/Postal Code: 92029
Country: USA
Focus: Build
Status: Semi-pro
I know I've posted this here before, but it is my own design. A Carbon Fiber soundboard nylon string archie.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Fri Jul 21, 2017 8:06 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
[quote="Pat Foster"]This one rattled around in my addled brain for a few years before it finally took shape. I've always like the petite upper bout of the L-00, and added more padding to the derriere.

Can't post photos anymore, but couldn't agree more...my Concert and Grand Concert.

http://www.brentrup.com/styled/page9.html

You make a beautiful guitar, Pat!


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Fri Jul 21, 2017 9:56 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat May 17, 2008 1:11 pm
Posts: 2371
Location: Spokane, Washington
First name: Pat
Last Name: Foster
Country: USA
Focus: Build
Status: Semi-pro
Haans wrote:
Pat Foster wrote:
This one rattled around in my addled brain for a few years before it finally took shape. I've always like the petite upper bout of the L-00, and added more padding to the derriere.


Can't post photos anymore, but couldn't agree more...my Concert and Grand Concert.

http://www.brentrup.com/styled/page9.html

You make a beautiful guitar, Pat!


Thank you, Haans. It's good to know you're still hovering around the interweb, watching over us, keeping us in line. :D I like those Gibson and Larson shapes a lot, though my next iteration will probably have a wider waist to match my own as it ages.


Bobc wrote:
Pat how do you get such a good fit around the diamond volute?


Bob, Well, if I had done the real birdbeak joint that this style volute descended from, it could have just been tucked under the pointed end of the volute. Since I didn't make a birdbeak, it took some precise trimming of the veneer. When I glued the veneer on, it actually crept up the slope of the volute a little bit. Then I trimmed it with a chisel laid flat on the headstock. A bit of careful sanding got me a clean line.

_________________
formerly known around here as burbank
_________________

http://www.patfosterguitars.com


Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Fri Jan 26, 2018 10:54 pm 
Offline
Walnut
Walnut

Joined: Sat Nov 09, 2013 9:58 pm
Posts: 30
First name: Trent
State: Iowa
Country: United States
Focus: Build
Status: Amateur
deleted


Last edited by woodgood on Wed Feb 28, 2024 11:37 pm, edited 4 times in total.

Top
 Profile  
 
 Post subject: Re: Custom/misc shapes
PostPosted: Sun Feb 04, 2018 12:07 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Fri Jul 01, 2011 2:14 pm
Posts: 268
Location: Creedmoor, NC
First name: Tim
Last Name: Benware
City: Creedmoor
State: NC
Zip/Postal Code: 27522
Country: USA
Focus: Build
Status: Professional
My soundport.


You do not have the required permissions to view the files attached to this post.

_________________
"I've been had again"
Tim Benware
Creedmoor, NC


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 45 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com