| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Advise on a back repair http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10137&t=42248 |
Page 1 of 1 |
| Author: | gxs [ Sat Dec 21, 2013 12:16 pm ] |
| Post subject: | Advise on a back repair |
I have a very old Washburn parlor guitar. It looks like a 122, but has tiger striped maple back an sides, stained to a medium walnut color. It is quite striking. The back is broken in several pieces, and I have all of the pieces with the exception of one the size of a pencil eraser. I was thinking about taking the back off, gluing it all back together and getting it flat, and putting it back on. Regarding the missing piece, I was thinking of shaving a piece of the tiger maple from inside the back, filling the hole and gluing a patch made from the piece I shave to fill the hole from the visible side. I was also thinking of putting a couple of cleats on the inside to keep it stable. Am I over thinking this? Does anyone have a better idea how to do this? Attachment: WIN_20131221_120750.JPG
|
|
| Author: | WudWerkr [ Sat Dec 21, 2013 1:10 pm ] |
| Post subject: | Re: Advise on a back repair |
Wrong or right i wont say , but based on what i see here , its probably the way id be looking . |
|
| Author: | gxs [ Mon Dec 23, 2013 12:41 am ] |
| Post subject: | Re: Advise on a back repair |
Thanks, I think that is the only way I'll get it good and sturdy, and flat. The stain seems really close to the surface, so I don't want to sand much for fear of hitting the stain. The back has a nice aged finish and don't want to change that. I thought when it is all done I'd go over with a thin (1#) shellac, a couple of times, just to seal the glued pieces. GS |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|