Official Luthiers Forum! • View topic

Board index » Instrument Restoration and Repair

All times are UTC - 5 hours

Kalamazoo Arch top

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

michael jennings

Post subject: Kalamazoo Arch top

Posted: Thu Oct 23, 2014 12:15 am

Contributing Member

Joined: Sun May 16, 2010 10:02 am
Posts: 89
First name: michael
Last Name: jennings
City: Lopez Island
State: WA
Zip/Postal Code: 98261
Country: United States
Focus: Repair
Status: Semi-pro

I have to pop the back off of a '30s/'40s Kalamazoo arc top to fix sprung back braces… [not especially looking forward to it…but] anyone familiar enough with these old Gibson budget models to at least reassure me that I'm not going to run into some ancient super adhesive for the rim joints?? Hopeful that it could be HHG ??

Mike

Top

B. Howard

Post subject: Re: Kalamazoo Arch top

Posted: Thu Oct 23, 2014 6:33 am

Brazilian Rosewood

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional

it is most likely a casien based glue. Steam and water will not help, only heat will soften it. Last one I had apart I had to replace all the linings.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/

Top

michael jennings

Post subject: Re: Kalamazoo Arch top

Posted: Sat Oct 25, 2014 9:33 am

Contributing Member

Thanks Brian…… was afraid of that. MJ

Top

Christopher Parker

Post subject: Re: Kalamazoo Arch top

Posted: Sun Oct 26, 2014 10:05 am

Walnut

Joined: Thu Jan 03, 2013 2:23 pm
Posts: 24
First name: Christopher
Last Name: Parker
City: Fatetteville
State: AR
Zip/Postal Code: 72701
Country: USA
Focus: Repair
Status: Professional

B. Howard wrote:

it is most likely a casien based glue. Steam and water will not help, only heat will soften it. Last one I had apart I had to replace all the linings.

Not Hide Glue? I was under the impression that Gibson was using hide glue exclusively until the advent of alophatic resin (white) glues. I've never heard of casien glues being used in guitar manufacturing.

I have a '30's Gibson L-37 (small body archtop with a flat back) - quite possibly the same size and shape as the Kalamazoo guitar mentioned by Michael. The back braces are loose on it, so I'm in the same predicament, and I'm dreading the job as well. The guitar sounds and plays okay as it is, but eventually I'm going to remove the back and fix it.

Top

Page 1 of 1

[ 4 posts ]

Board index » Instrument Restoration and Repair

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: