| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| New User - touch up finish question on older Yamaha http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10137&t=46631 |
Page 1 of 1 |
| Author: | terry dean [ Mon Nov 09, 2015 7:50 pm ] |
| Post subject: | New User - touch up finish question on older Yamaha |
hi all, I have a couple of older Yamaha guitars I am practicing on touching up cracks and small dings on the body and neck 1 - I put CA (super glue ) to fill in 2 - I scrapped carefully with razor blade and tape on both sides 3 - I used micro mesh to sand down 4 - what is the best way to repair the finish to blend back in??? Any thoughts tricks or products - appreciate the feedback - thanks |
|
| Author: | Greg Maxwell [ Mon Nov 09, 2015 8:55 pm ] |
| Post subject: | Re: New User - touch up finish question on older Yamaha |
I use a power buffer with medium and fine buffing compound to bring back the gloss on touch up repairs. You can also use foam buffing wheels in a power drill, available from Stew Mac. I suggest not going crazy with repairing dings, they are part of the character of an old guitar and its easy to make them look worse. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|