| Official Luthiers Forum! http://w-ww.luthiersforum.com/forum/ |
|
| Gibson Historic finish http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10137&t=46643 |
Page 1 of 1 |
| Author: | Bill Braske [ Wed Nov 11, 2015 9:11 am ] |
| Post subject: | Gibson Historic finish |
The Historics have a "not quite glossy" finish to them. I always liked that about them. Alembics had a similar thing going on. Is it just a hand rubbed finish or is there more to it than that? I've got a Les Paul that I think would look really good like that and I'm thinking about bustin out the polishing compound and giving it a go. I'm not trying to "relic" it, just give it a little lived in look. Any thoughts? |
|
| Author: | dzsmith [ Wed Nov 11, 2015 6:55 pm ] |
| Post subject: | Re: Gibson Historic finish |
Mark, It may depend on what type of finish it is. I had a LP that I tried polishing, but there were witness lines in the finish. I guess it was caused by the top layer of finish not "melted" into the underling layer. Someone may have applied a different type of finish on the top layer before I got it. It was a '69 so I figured it was nitro lacquer. I bought it used. Dan |
|
| Author: | Ruby50 [ Wed Nov 11, 2015 9:04 pm ] |
| Post subject: | Re: Gibson Historic finish |
Mark I rebuilt a 1933 L-00 that was black. The body had been pretty much wrecked and what with a new back, a hole in the side and numerous top cracks, I had to paint it, but the neck had good mojo. So the trick was to make the new paint on the body match the original paint on the neck: https://www.flickr.com/photos/ruby1638/ ... 344222304/ I have a local car body guy who builds electric guitars do my lacquer spraying. We talked about it and he sprayed, and leveled and sanded to 2000 by hand. Then I took it to 4000 and hand polished and the match is quite good. Ed |
|
| Author: | Bill Braske [ Thu Nov 12, 2015 7:27 pm ] |
| Post subject: | Re: Gibson Historic finish |
Thanks, guys. I may have a go at it, but I am a little hesitant now. I just figured if I didn't like it I could just buff it back glossy, but if the finish is (possibly) such that buffing might leave witness lines I may not do it. |
|
| Author: | Shaw [ Fri Nov 13, 2015 10:49 pm ] |
| Post subject: | Re: Gibson Historic finish |
Takes some 0000 steel wool to it. Sent from my SGH-T599 using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|