Official Luthiers Forum!
http://w-ww.luthiersforum.com/forum/

1890's Washburn Parlor - Repair / Restoration
http://w-ww.luthiersforum.com/forum/viewtopic.php?f=10137&t=48908		 Page 1 of 1
Author:  dpetrzelka [ Mon Jan 23, 2017 11:57 am ]
Post subject:  1890's Washburn Parlor - Repair / Restoration
A good friend has a sweet 1890's Washburn parlor in need of a little TLC. I'm working on upping my game with really quality vintage guitar repair/restoration and this little guitar needs the love, and offers a lower risk opportunity to practice some of the skills I've been learning.

It came to me right after suffering really low humidity, 16% for a long weekend, and after suffering assault from a falling guitar stand that cracked the soundboard at the soundhole edge. Upon looking inside, and out, we found a few other areas that need attention.

I'll first share where it's at, and then try to document the process and final work. I'll welcome any tips or opinions along the way.

Image

Image
Author:  dpetrzelka [ Mon Jan 23, 2017 12:01 pm ]
Post subject:  Re: 1890's Washburn Parlor - Repair / Restoration
Soundhole damage from a stand that fell on this sweet little guitar.

Image

Image
Author:  dpetrzelka [ Mon Jan 23, 2017 12:10 pm ]
Post subject:  Re: 1890's Washburn Parlor - Repair / Restoration
Side cracks from either or both low humidity and/or the falling stand.

Image

Image
Author:  truckjohn [ Mon Jan 23, 2017 12:14 pm ]
Post subject:  Re: 1890's Washburn Parlor - Repair / Restoration
Yikes. Looks like a great project.
Author:  dpetrzelka [ Mon Jan 23, 2017 1:01 pm ]
Post subject:  Re: 1890's Washburn Parlor - Repair / Restoration
To get a good look inside, I removed the LR Baggs mic - not a lot or room in this little parlor, and even less with a pickup installed. My friend wanted it out anyway.

Image

With endpin jack out, I'll want to fix this oversized hole. I could just use an oversized endpin, but I would like to do a proper patch and replace with similar BRW end wedge.

Image
Author:  dpetrzelka [ Mon Jan 23, 2017 1:20 pm ]
Post subject:  Re: 1890's Washburn Parlor - Repair / Restoration
And now it gets good.

Clearly more than one person has worked on this instrument before me - I could see the splicing and crack repair from the top, but images from the box tell us more:

Re-braced top - with old tape, new lattice bracing, and misc. glue remnants.


Image

Image

Image
Author:  dpetrzelka [ Mon Jan 23, 2017 1:21 pm ]
Post subject:  Re: 1890's Washburn Parlor - Repair / Restoration
More of the bracing, and a bridge plate that has seen better days.

Image

Image
Author:  dpetrzelka [ Mon Jan 23, 2017 1:25 pm ]
Post subject:  Re: 1890's Washburn Parlor - Repair / Restoration
Here is evidence of the risks in using CA to repair side crack. It can work wonders, but it can also leak into the box leaving a unsightly glue runs.

Sometimes we must carefully undo the not-so-carefully-done work of others.

Image

Image

Image
Author:  dpetrzelka [ Mon Jan 23, 2017 1:28 pm ]
Post subject:  Re: 1890's Washburn Parlor - Repair / Restoration
Someone had installed a very smart-looking ebony pyramid bridge - but I suspect the lack of slotting might have led to the bridge plate splitting.

Image

Image
Author:  Glen H [ Mon Jan 23, 2017 1:37 pm ]
Post subject:  Re: 1890's Washburn Parlor - Repair / Restoration
Wow. The inside looks like it doubled as an ash-tray.
Author:  Imbler [ Mon Jan 23, 2017 1:53 pm ]
Post subject:  Re: 1890's Washburn Parlor - Repair / Restoration
Bummer! I see from the label that it is probably out of warranty!
Author:  SteveSmith [ Mon Jan 23, 2017 3:48 pm ]
Post subject:  Re: 1890's Washburn Parlor - Repair / Restoration
A lot of challenges there, looking forward to following along on this one.
Author:  Johny [ Mon Jan 23, 2017 7:20 pm ]
Post subject:  Re: 1890's Washburn Parlor - Repair / Restoration
That's an exciting project. Keep us posted!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/